USING YOUR BLENDER & SMOOTHIE DISPENSER
BEFORE FIRST USE
•Make sure the voltage in your outlet is the same as the voltage indicated on the appliance. This product is for 120
•The Blender & Smoothie Dispenser is equipped with a safety locking system to increase security during operation. The blending function will not work if the jar, blades and cover are not properly locked in place.
•Remove any bags, labels or stickers from the appliance.
•Clean the base unit with a damp soft cloth.
•Wash all of the removable parts – jar, lid, filler cap,dispenser, dispenser lever and drip tray using a sponge, warm water and mild dish detergent. Rinse and dry carefully.
•NOTE: do not immerse the base unit in water when cleaning.
HOW TO USE YOUR BLENDER & SMOOTHIE DISPENSER
•Place the unit on a flat, dry,sturdy surface. This appliance is not for use in convection, or conventional ovens,microwaves,or on stovetop.
•Wash and dry all components thoroughly as stated above.
•Assemble blender components. Always be sure that the appliance is properly assembled before using. Blades are extremely sharp; never touch the cutting edge of blades.
•Make sure the rotary control knob is at the “0” position. Plug the cord into AC wall outlet.
•Pull the drip tray to the extended position.
•Place jar onto the base.
•Add ingredients to the jar as directed by your recipe.
•Add ingredients to the blender a little at a time to ensure proper blending and to prevent overflow. Never fill container more than ¾ full; the action of the blade will cause ingredients to rise in the container. Make larger recipes in multiple batches.
•Unless the recipe states differently, pour liquid ingredients into the blender be- fore solid ingredients. Adding the liquid first will reduce blending time.
•Always add 1 cup of liquid before processing ice.
•Place the lid with the filler cap in position onto the jar. Remember; always hold the handle during blending.
•Turn the rotary control knob to the desired speed for blending.
•After finished blending, turn off by turning the rotary control knob to the “0” position.
Always turn blender off and wait until blades have stopped
rotating before removing jar.
6