SPX Cooling Technologies JW Series specs

Recold / JW Series Fluid Cooler / Construction

The JW Evaporative Fluid Cooler is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Quality materials and workmanship are a key factor in meeting this objective.

FAN MOTORS

Fan motors furnished as standard equipment are open drip-proof type suitable for outdoor service. Motors have a 1.15 service factor and are mounted on a heavy duty adjustable base located for easy access.

FAN GUARD SCREENS

All moving parts are protected with OSHA approved galvanized steel screens. Each guard is easily removed for access to the fan.

FAN SECTION

The centrifugal fan is forward curved, statically and dynamically balanced and constructed of galvanized steel. The fan housing has curved inlet rings for efficient air entry and discharge into the pan. Fans are mounted on a solid steel shaft coated to resist corrosion. Heavy duty, pillow block type, self-aligning ball bearings are located at each end of the fan shaft.

No intermediate bearings are required

Extended lube lines are supplied as standard equipment to allow servicing bearings without removal of fan guard screens.

WATER CIRCULATION PUMP

The water circulation pump is a close coupled, bronze fitted centrifugal type with mechanical seal. Each pump is factory mounted and piped. Standard motor is open drip-proof suitable for outdoor service.

DRIFT ELIMINATORS

Eliminators are constructed of PVC assemblies in removable, easy to handle sections. Each section has a three break design allowing three changes in air flow and measure approximately 5 inches in depth. The use of durable PVC eliminates the corrosion problems associated with galvanized eliminators.

HEAT EXCHANGE COIL

Coil tube bundle is constructed of 5⁄8" copper tubing with stainless steel tube sheets

and copper headers. The copper construction offers a

noncorrosive coil for extended service life.

ACCESS DOORS

Large rectangular access doors are strategically located to provide access to both upper water distribution system and lower pan basin. The patented doors provide a complete air and water tight seal without the use of gaskets or fasteners

WATER MAKE-UP

Water make-up is provided by a solid brass float valve with arm

and float ball installed in an external float b o x . This allows easy observation of the water operating level and maintenance of the valve with unit in operation.

Construction: The Evaporative Fluid Cooler sump pan is constructed of 300 stainless steel and casing panels are constructed of heavy gauge, G-235 galvanized steel. The sump pan and casing panels are flanged outward so that all the connecting fasteners are located outside the flooded section of the unit to help prevent leaks in the unit and provides a more permanent watertight joint. To provide further protection from corrosion, no welded joints are located below the water line. The unit is designed for a 30 psf on any projected area and ships in one piece on a minimum 6" high stainless steel channel base to help in handling and installation of the unit.

JW Series specifications

The SPX Cooling Technologies JW Series represents a significant advancement in industrial cooling solutions, designed for maximum efficiency and performance in various applications. Engineered to meet the demanding requirements of modern facilities, the JW Series cooling towers combine innovative technologies with a focus on reliability and ease of maintenance.

One of the primary features of the JW Series is its robust construction, utilizing high-quality materials that ensure longevity and durability even in harsh environmental conditions. The towers are designed with a modular configuration, allowing for flexible installation and scalability to meet changing cooling needs. This adaptability makes the JW Series ideal for industries ranging from petrochemical and power generation to HVAC systems and manufacturing.

The JW Series is highlighted by its advanced heat transfer technology, which optimizes thermal performance while minimizing water consumption. The innovative fill packing is engineered to enhance the absorption of heat, allowing for more efficient cooling performance and reduced operational costs. This design not only improves efficacy but also contributes to lower environmental impact by conserving water.

In terms of energy efficiency, the JW Series is equipped with variable speed fans that adjust airflow based on real-time cooling requirements. This intelligent fan control system reduces energy consumption during periods of lower demand, translating to significant cost savings over time. Coupled with a state-of-the-art control system, operators can monitor and manage cooling operations remotely, ensuring optimal performance while minimizing personnel involvement.

Maintenance is simplified with the JW Series, which features access panels that provide easy entry to critical components for inspection and repair. The modular design of the components allows for quick replacement, reducing downtime and maintenance costs.

Another notable characteristic of the JW Series is its acoustic optimization. The cooling towers are designed to operate quietly, minimizing noise pollution in surrounding areas, which is particularly important for urban installations or facilities near residential neighborhoods.

In conclusion, the SPX Cooling Technologies JW Series stands out for its combination of durability, efficiency, and user-friendly design. With advanced technologies tailored to meet the challenges of today’s industrial cooling needs, it offers a reliable solution that can enhance operational performance and contribute to sustainable practices. These features combined make the JW Series an excellent choice for a wide range of cooling applications.