JVC XV-M512SL manual Rear panel, Otherwise, the changed setting will not be effective

Preliminary knowledge

Rear panel

1VIDEO OUT - VIDEO jack

2VIDEO OUT - S-VIDEO jack

3VIDEO OUT SELECT switch (NTSC/PAL)

4VIDEO OUT - COMPONENT jacks (Y/PB/PR)

		VIDEO OUT	COMPONENT
	VIDEO S-VIDEO
		Y	PB	PR
	AV COMPU LINK	AUDIO OUT	DIGITAL OUT
			PCM / STREAM
	VIDEO OUT		COAXIAL	OPTICAL
			L
	SELECT	ATTENUATOR
Preliminary	NTSC PAL	OFF ON
	knowledge		R
				9 DIGITAL OUT jack(s) (COAXIAL/OPTICAL)

8AUDIO OUT jacks (Left/Right)

7ATTENUATOR (ON/OFF) switch

6AV COMPU LINK jacks

5Region code label

4

AC IN

0 AC IN connector

1VIDEO OUT - VIDEO jack (16) Outputs a composite video signal.

2VIDEO OUT - S-VIDEO jack (16) Outputs an S-video signal.

Note that this jack is not active when you make the COMPONENT VIDEO OUT jacks active. See “How to make the COMPONENT VIDEO OUT jacks active” on page 17 for details.

3VIDEO OUT SELECT switch (NTSC/PAL) (16) Selects “NTSC” or “PAL” to match the color system of your TV. Note that the unit power must be off (standby) when you change the switch position.

Otherwise, the changed setting will not be effective.

4VIDEO OUT - COMPONENT jacks (Y/PB/PR) (17) Output component video signals.

These jacks are not active in the initial (factory preset) condition. See “How to make the COMPONENT VIDEO OUT jacks active” on page 17 for details.

5Region code label (15) Shows region code number.

6AV COMPU LINK jacks (60)

Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations.

7ATTENUATOR (ON/OFF) switch (16)

Attenuates the audio output level when it is set to ON.

8AUDIO OUT jacks (Left/Right) (16, 18) Outputs stereo analog audio signals.

9DIGITAL OUT jack(s) (COAXIAL/OPTICAL) (18) Outputs digital audio signals. You must select the signal type correctly according to the external device connected to via the Preference display.

0 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

10