Tappan 316000189 Before Setting Oven Controls, Arranging Oven Racks, Oven Vent Location

Page 7

Before Setting Oven Controls

Arranging Oven Racks

(Some models may have one rack.) ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when using the oven.

Oven Vent Location

The oven vent is located below the backguard. When the oven is on, warm air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results.

REMOVING & REPLACING OVEN

RACKS

To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

ARRANGING OVEN RACKS WITH 5

RACK POSITIONS

To bake on 1 rack, place the rack on position 3 or 4. To bake on 2 racks, place the racks on positions 2 and 4.

7

Image 7

Contents GAS Range Version française Product RegistrationRegister Your Product Versión en españolStepping, leaning or sitting on the doors or Important Safety InstructionsElectric ignition models only Do Not Use Oven Cleaners on the oven liner or anyContinuous cleaning surfaces. Continuous cleaning surfaces Grounding InstructionsTo Set the Clock Setting the Clock and Minute TimerTo Set the Minute Timer Minute Timer modeProper Burner AdjustmentsSetting Surface Flame SizeArranging Oven Racks Before Setting Oven ControlsOven Vent Location Bake Setting Oven ControlsBroil To Clean the Oven Bottom Oven CleaningPorcelain Enamel Oven and Broiler Drawer Adhere to the following cleaning precautions Continuous Cleaning Oven some modelsIf difficult soils occur To Clean the Cooktop General CleaningCleaning Various Parts of Your Range To Change the Oven Light some models Changing Oven LightTo Remove and Replace Oven Door To Remove and Replace Oven BottomAvoid Service Checklist Oven smokes excessively during broiling Entire appliance does not operatePoor baking results Tappan Range Warranty