8 . If the freezer does not work correctly even after | 8 |
X you have consulted the trouble shooting guide, | X |
contact after sales Service. |
|
INSTALLATION
X9 . Do not install the appliance close to any heat source. High room temperatures, direct sunlight, or location near heating or stoves increase the power consumtion and shoul be avoided. If it is not possible to avoid placing the appliance next to a source of heat, note that the following spacings should be maintained:
to coal oil ovens or heaters 30 cm | 9 |
X
to electric cookers/Hotplates 3 cm
x The appliance must be placed in a dry and
x Clean the interior (see “DEFROSTING AND CLEANING THE APPLIANCE”).
x Assemble the accessories.
x Check the efficiency of the door seal, especially after the appliance has been built in and the door opening direction has been changed.
Electrical connection
xCheck that the voltage shown on the rating plate corresponds to the voltage in your home.
xThe appliance must be earthed in accordance with the law. The Manufacturer cannot be held liable for any injury to persons or damage to property resulting from the failure to comply with this requirement.
xIf the appliance plug and the wall socket are incompatible, the socket must be replaced by a qualified electrician.
xDo not use adapters, multiple sockets or extension cables.
20