Instructions for the installer
2.6Gas connection
Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe conforming to the provisions defined by
After connection operations, check for leaks using a soapy solution.
The hob has been inspected for G20 natural gas (2H) at a pressure of 20 mbar. For use with other types of gas, see chapter “3. ADJUSTMENT TO DIFFERENT TYPES OF GAS. The hose connection at the rear of the appliance has a ½” internal thread (ISO
Connection with rigid copper pipe:
the connection to the gas mains must not provoke stress of any kind on the appliance.
Connection may be made by using biconicaladapter D with insertion of gasket C supplied.
Connection with flexible steel pipe:
use only flexible stainless steel pipes conforming to
The flexible pipe must be installed so that pipe length does not exceed 2 meters of maximum extension. Make sure that the pipes do not touch any moving parts or become crushed.
2.7Connection to LPG
Use a pressure regulator and make the connection to the tank according to the provisions of
28