Ventilation requirements | Smeg PGF95-1, PGF95F-1, PGF95BE-1

Instructions for the installer

2.4Ventilation requirements

The appliance may be installed only in rooms with permanent ventilation, as required by UNI-CIG 7129 / 7131 standards. The room in which the appliance is installed must have sufficient air flow to satisfy the requirements of normal gas combustion and of necessary air exchange in the room. The air intakes, protected by grills, must be appropriately sized (UNI CIG 7129 / 7131) and placed so as not to be blocked in any way.

The room must be suitably ventilated to avoid overheating or excess humidity produced by cooking; after any prolonged use, a window should be opened or the speed of any fans should be increased.

2.5Discharge of combustion products

Discharge of combustion products must be guaranteed by means of hoods connected to a natural draught flue with certain efficiency, or by means of forced aspiration. An efficient aspiration system requires careful planning by a qualified specialist, respecting the positions and distances prescribed by standards. After installation, the installer must issue a certificate of conformity.