Instructions for the User
12. USING THE APPLIANCE
12.1 Insertion and replacement of the battery
Models in this range are equipped with a compartment for a 1.5 V AA battery, which lights the burner igniters.
To insert or replace the battery, follow the instructions provided below, referring to the drawing:
•access the battery container through the hole
in the back (see drawing);
•unscrew the cap A;
•replace the battery B with one of the same
type;
•pay attention to the polarity of the battery
(strictly follow the drawing shown at the side);
• screw the cap A back;
Warning: Used batteries may not be dumped in the environment or thrown out with other objects. They must be collected separately and brought to the local company authorised for refuse disposal or disposed of in the specific used battery collection containers.
12.2 Positioning the grid
Position the grid in the relevant holder as shown in the figure.
47