Smeg HB96CSS-3, HB96GXBE3 manual Practical tips for using the burners, Pan diameters

Page 7

Instructions for the User

5.2Practical tips for using the burners

For better burner efficiency and to minimise gas consumption, use pans with a flat, smooth base and a lid that have a suitable size for the burner, thus avoiding that the flames reach the sides of the pan (see point "5.3 Pan diameters"). Once the contents come to the boil, turn down the flame far enough to prevent the liquid from boiling over.

To prevent burns or damage to the hob during cooking, all pans or griddle plates must be placed inside the perimeter of the hob.

Take the greatest care when using fats or oils since they may catch fire if overheated.

5.3Pan diameters

BURNERS

MIN. AND MAX.

 

 

Ø (IN CM)

1

Auxiliary

12 - 14

2

Semi rapid

16 - 20

3

Rapid

18 - 24

4

Ultra-rapid

20 - 26

The following are the diameters of the pans that can be used with the raised pan stand:

BURNERS

MIN. AND MAX. Ø (IN CM)

1

Auxiliary

16 - 24

2

Rapid

26 - 28

If you have the Tepanyaki plate (optional extra) never use it on the ultra- rapid burner for any reason.

Warning:

At the end of cooking using pans with aluminium bases you may find white residues on the cast iron pan stands. These residues are usually caused by the pan base rubbing against the pan stand and are difficult to remove with normal cleaning. Using abrasive or excessively aggressive products to clean the pan stand could damage its enamel surface.

28

Image 7
Contents Contents Instructions for USE Precautions for useInstructions for Disposal OUR Environmental Care Instructions for disposal Safety Instructions Safety instructionsKnow Your Appliance Instructions for the UserGas hob Using the HOBPan diameters Practical tips for using the burnersOrdinary daily cleaning Cleaning and MaintenanceCleaning stainless steel Cleaning the gas componentsPositioning Instructions for the installerInstalling the Appliance Heights for type a installation empty baseHeights for type B installation full base Supporting base Mounting for type a installations Mounting for type B installations Do not remove this plate for any reason Electrical connectionConnection with rigid copper hose GAS ConnectionConnection with flexible steel hose Room ventilation Connection to liquid gasExtraction of the products of combustion Adaptation to Different Types of GAS Replacement of nozzles on the hobLPG G30/G31 28/37 mbar Burner and nozzle characteristics tableLubrication of gas taps Adjusting the minimum for town and natural gasAdjusting the minimum for liquid gas Final Operations for GAS Appliances