Smeg PX140BE, PX140NL, PX140D manual Wrong

Page 13

Instructions for the User

Make sure that the pan stands are simply fitted over their burners, and are not left in a raised or tilted position; if this occurs, repeat the fitting procedure.

WRONG

RIGHT

WRONGRIGHT

After performing the operations described above (for each pan stand), the hob will be as shown below, with the feet of the pan stands forming a pattern of horizontal and vertical lines.

If a pan wobbles noticeably, check that the pan stands have not been fitted incorrectly.

Image 13

Contents Table of Contents Precautions for safety and use Precautions for Safety and UseFitting the appliance in the top Instructions for the InstallerFixing to the supporting structure Fitting the gasket Fixing using bracketsElectrical connection Bottled gas connection Gas connectionRoom ventilation Combustion gas dischargeRemoving the hob skin Adapting to different types of gasRated BurnerheatBottled gas G30/G31 30/37 mbar capacity Adjusting for bottled gasAdjusting the primary air flow Adjusting for natural gasAdjusting the minimum for bottled gas Adjusting the minimum for natural gasReassembling the hob skin Hob burner layoutFront panel Description of controlsInstructions for the User Using the hobFitting the Pan Stands Wrong Practical hints for using the burners Lighting burners with safety devicePan diameters Cleaning the hob Cleaning and maintenanceCleaning the components