Instructions for the Installer
2.2 Fitting the gasket
Fit the insulating gasket provided carefully around the outside edge of the hole made in the top as shown below, pressing it down with your hands so that its entire surface fits snugly. Follow the dimensions shown, bearing in mind that the long front edge must be flush with the hole.
2.3 Fixing using brackets
Fix the hob to the structure using the brackets A provided. Carefully trim off the excess edge of the
gasket B. The dimensions in the drawing below refer to the hole on the inside edge of the gasket.
See right for the precise holes to be used when securing the hob to the top correctly using the brackets.
22