Smeg SE435XT manual Use

Page 4

USE

WARNINGS:

When the plate is switched on for the first time, or if it has remained unused for a long period, it should be dried for 30 minutes on switch position n° 1. This will eliminate any moisture that may have been absorbed by the insulating material.

To correctly use the appliance, remember:

-To place a pan on the plate before switching this on.

-To always use pans with flat and very thick bottoms (see fig. 3).

-To never use pans that are smaller than the plate diameters.

-To dry the bottom of the pan before placing it on the plate.

-Correctly preserve the plate after use by treating it with special products, easily available on the market. This will keep the surface of the plate clean and bright. The operation will also prevent the formation of rust. Never allow children to play near the appliance when using the plates. Check that the pan handles are positioned correctly. The user should never leave the appliance unattended when cooking with easily inflammable oil and fat.

-The plates will remain hot for a long period of time even after use. Never touch them with the hands or other objects in order to prevent scorching.

-If the appliance has a glass lid, this could shatter when the cooker becomes hot. Always disconnect all the plates before closing the lid.

-Immediately disconnect the appliance from the electricity main as soon as cracks are noted on the surfaces of the plates.

FIG. 3

4

Image 4
Contents Tipo PAZ04 MOD. SE435XT Description of the HOT Plates HOW to USE the Electric Plates Switching on the Electric PlatesUSE USE Cleaning HotplateInstalling the HOT Plate InstallationFixing the HOT Plate Electrical Connections Changing the Type of Power Supply ConversionsPower of Electrical Components Denominations W Type and Section of the Power CablesServicing Replacing the Electrical ComponentsTechnical Data Technical Assistance and Spare Parts