CONVERSIONS
Disconnect the appliance from the mains supply prior to any conversions being carried out.
7)CHANGING THE TYPE OF POWER SUPPLY
Although they leave our factory preset for single- phase connection, certain appliances may by converted to the threephase system.
Comply with the following instructions:
a)Remove the hotplate from the top of the cabinet, overturn it, unscrew screw "Z" and remove under part (see fig. 9).
b)Shift connecting plate on terminal according to the following chart. This chart is also affixed to the hob.
c)Insert a supply cable of adequate section (see chart par. 10) through core hitch on the terminal board.
d)Connect the phase and earth wires to the relative terminal board.
e)Fix the supply cable in place using clamp.
f)Refit the hotplate, complying with the above instructions in reverse.
FIG. 9
FIG. 10
8