Instructions for assembly, Installation

Instructions for assembly

Safety instructions for the kitchen fitter

•Veneers, stuck-on or plastic surfaces of surrounding furniture must be temperature resistant (>75°C). If the veneers and sur- faces are not sufficiently heat resistant they can become defor- med.

•Ensure that all live connections are safely insulated when installing the hob.

•Cover strips between the wall and the worktop behind the hob which are made of solid wood are permissible as long as mini- mum clearances in accordance with the installation diagrams are maintained.

•Minimum clearances of the hob cut-out towards the rear are to be maintained in accordance with the installation diagram.

•For installation directly next to a tall cupboard, a safety dis- tance of at least 40 mm. The side surface of the tall cupboard should be fitted with heat resistant material. Due to working requirements, however, the distance should be at least 300 mm.

•The clearance between the hob and an extraction hood must be at least as large as that stipulated in the assembly instruc- tions for the cooker hood.

•The packaging materials (plastic foil, polystyrene, nails etc.) must be kept out of reach of children as these parts are poten- tially dangerous. Small parts can be swallowed and there is a danger of suffocation.

Installation

Important

•If the cooking surface is located above furniture parts (side panels, drawers, etc.), then an intermediate bottom must be inserted at a minimum distance of 20 mm in order to prevent accidental contact with the underside of the cooking surface. The intermediary shelf may only be removed by tools.

•To avoid danger of fire, make sure that no combustible objects which could easily catch fire or become deformed on exposure to heat are directly next to or above the surface.

Sealing of cooking zone

Before installation, correctly insert the sealing unit delivered with the hob.

•In addition, make sure that no liquids can penetrate between the edge of the hob and the worktop or between the hob and the wall and come into contact with any electrical appliances.

•When installing a hob into an uneven worktop, e.g. with a cera- mic or similar covering (tiles etc.), the seal on the hob is to be removed and the seal between the hob and worktop made with plastic sealing materials (putty).

•The hob must under no circumstances be sealed with sili- cone sealant!This would make it impossible to remove the hob at a later date without damaging it.

Ventilation

•The back wall of the cabinet must be open in the area of the cut-out in order to provide for air circulation.

•The front transverse strip of the furniture must be removed so that an opening is provided for air flow underneath the worktop over the entire width of the unit.

•Remove any transverse strips underneath the worktop at least in the area of the worktop cut-out.

•The distance between induction hob and kitchen furniture resp. built-in unit must provide for sufficient ventilation of the induction.

•The ventilation openings must be thermically devided with the attached screen shield. Thus a back-flow of warmed air is pre- vented from entering the cool air intake.

•Attention!

The screen shield must not cover the ventilation openings. If necessary, shorten the shield up to the furniture or built-in unit.

•Avoid excessive thermal development from below e.g. from a baking oven without a cross flow cooling device.

•The induction hob may not be used when pyrolysis operation is taking place in a built-in oven.

Insulation

Bottom of the hob

Front

Insulation

SE2732ID specifications

The Smeg SE2732ID is an innovative and stylish integrated dishwasher designed to meet the demands of modern households. Combining functionality with aesthetics, it offers a perfect blend of practicality and design that Smeg is renowned for.

One of the standout features of the SE2732ID is its energy efficiency. It boasts an impressive energy rating, contributing to lower utility bills while being environmentally friendly. This model incorporates advanced technologies that optimize water and energy consumption, ensuring that you can run your dishwasher without excessive resource use.

The SE2732ID is equipped with multiple wash programs, allowing users to select the best option based on the type of load. This includes Eco, Intensive, and Quick cycles, catering to everything from heavily soiled pots and pans to delicate glassware. Its flexibility ensures that it can handle a variety of dish types efficiently.

In addition to customizable washing cycles, this dishwasher also features innovative technology such as Smeg's patented Multi-Flow System, which ensures an even distribution of water throughout the dishwasher. This results in consistent cleaning results across all dishes, regardless of their placement in the machine.

Another important characteristic of the SE2732ID is its spacious interior. With multiple racks and compartments, the dishwasher is designed to accommodate a wide array of kitchenware. It includes adjustable and removable cutlery baskets, making it easier to load larger items or unique shapes without sacrificing cleaning quality.

The Smeg SE2732ID also emphasizes quiet operation. With a low decibel rating, it delivers impressive cleaning power while remaining unobtrusive in your kitchen environment. This is particularly beneficial for open-plan living spaces, where noise can be a concern.

Smeg’s characteristic design touch is evident in the SE2732ID, featuring a sleek integrated facade that blends seamlessly with cabinetry. This makes it an ideal choice for those looking to maintain a streamlined kitchen aesthetic. The controls are user-friendly, allowing for intuitive operation even for those who may be less tech-savvy.

Safety features like child locks and anti-flood systems further enhance its appeal, providing peace of mind for busy families.

In summary, the Smeg SE2732ID is an exceptional integrated dishwasher that combines energy efficiency, versatility, spaciousness, quiet operation, and stylish design, making it a worthy addition to any kitchen.