Smeg ST93P manual User instructions, Setting the Washing Program and Switching on

User instructions

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

2 3 4 8 7 6 5 10 9 1

end

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

		PROGRAMME,		LOAD CROCKERY	PROGRAM	DURATION	CONSUMPTION
	NUMBER & SYMBOL			AND CUTLERY	PROGRESS	MINUTES	WATER	POWER
						(2)	LITRES (1)	KWh (2)
1				Pans and dishes for	Cold rinse	60'	11	0,9
			RINSE		Rinse at 68°C
				rinsing and drying
					Dry
					Cold prewash
			NORMAL	Dishes	Wash at 40°C	123'	16,9	0,75
2					Cold rinse
			ECO (*)	with normal dirt
					Rinse at 45°C
					Dry
					Cold prewash
3				Dishes	Wash at 55°C	100'	21	1,40
			BIO		Cold rinse
				with normal dirt
					Rinse at 68°C
					Dry
					Cold prewash
4				Normally soiled	Wash at 65°C	95'		1,40
			NORMAL	dishes, including	Cold rinse		20
				dried-on residue	Rinse at 68°C
					Dry

12