JBL MS-10SD4 SLIM, MS-10SD2 SLIM owner manual 选择音箱外壳

Page 86

感谢 您购买 MS SLIM 系列低音炮。安装低音炮需要木工手艺和一些

拆卸和重装汽车内饰的经验。若您没有工具或缺少必要技能、请由特许

JBL® 经销商为您安装低音炮。

警告:在车中大声播放音乐可能对您的听力造成永久损害,并影响您注

意交通声响的能力。我们建议您在开车时将音量调低。我们概不对因使 用或不当使用本产品造成的失聪、人身伤害或财产损失承担任何责任。

选择音箱外壳

MS SLIM 系列低音炮采用小型的密封箱和开口箱均可表现最佳音色

MS SLIM 低音炮可选择无限障板安装但由于没有封闭的空气量防止 喇叭振盆超出限制、功率容量会大幅下降。因此、我们建议 MS 低音炮 不要安装无限障板。

您应根据您聆听的音乐类型、用于低音炮的放大器功率和车内可用于放 低音炮音箱的空间、选择音箱外壳。

由于密封箱壳最能控制低音喇叭的移动、安装在密封式箱壳将比安装其 它类型箱壳中的低音喇叭有更强劲的功率输出。安装在车内时、密封式 音箱要比其它类型的音箱实现更为准确的再生声波、因此适合各种音风 格。密封式音箱结构简单、市面上已有多种预制密封式音箱可供选择。一 款优秀的密封式音箱通常比专用于特定喇叭的其它类型音箱要小、因此所

需的车内空间最少。

开口式音箱在 40 赫至 50 赫范围内效果更佳、但代价是声音的八度音阶 最低(低于 40 赫)、且部分控制和功率容量处于最低频率。若您使用小 功率放大器、开口式音箱将以较低的功率产生较强的重低音输出量。开口 式音箱也适合各种音乐风格。由于开口式音箱要求其箱体容积和端口尺寸 与低音喇叭的特性有特定关系、因此箱体必须严格按照指定规格设置。尽 管有一些预制开口式音箱可供选择、但要为特定低音炮选配一款预制音箱 实属不易。如果您想使用开口式音箱、我们强烈建议由特许 JBL 经销商 设置、如果您希望自己设置、请让经销商确认设计是否正确。一款出色的

开口箱通常要比同款低音喇叭的优秀密封箱大、所需车内空间也更大

将低音炮连接至放大器

JBL MS SLIM 系列低音炮提供两种不同的配置:双 2 欧姆音圈或双 4

欧姆音圈。您可使用单个或多个 MS SLIM 低音喇叭、让放大器功率得 以最大输出。要实现最大放大器输出、您应设计一个让放大器安全驱动 的最低阻抗喇叭系统。设计低音炮系统时、请考虑以下规则:

1.请勿在同一个系统中混用不同型号的低音炮或音箱。同一个音箱中使 用或同一个放大器驱动的低音炮应为相同型号。低音喇叭和箱壳搭

配不当会使低音炮系统表现欠佳。

2.您必须串联或并联双音圈低音喇叭的两个音圈。

3.大多数放大器桥接至 4 欧姆载荷的功率与运行 2 欧姆立体声载荷完 全相同。

要设计可最大输出放大器功率的低音炮系统、请谨记以下规则:

1.并联低音喇叭的总系统阻抗可用此公式计算:

1

阻抗 =

 

 

 

 

 

 

w 表示低音喇叭

 

1

 

1

 

1

...

 

 

w1

+ w2

+ w3

的额定阻抗。

2.串联音圈(或低音喇叭)的总系统阻抗可用此公式计算: 阻抗 = w1 + w2 + w3 ...

下图显示如何并联和串联喇叭。

1:并联

 

2:串联

 

 

 

红色

黑色

 

红色

(+)

(-)

 

 

黑色

 

 

 

(+)

 

 

 

(-)

 

(+)

(-)

(+)

 

来自放大器

 

(-)

 

 

 

来自放大器

86

Image 86
Contents MS Series Slim MS-10SD2 Slim MS-10SD4 SlimConnecting Your Subwoofer to Your Amplifier Choosing AN EnclosureRectangular BOX Trapezoid Rectangular BOX Enclosures Internal Volume Calculation InstructionsSuggested Enclosures Ft 3 28lVented BOX MS-10SD2 SLIM, MS-10SD4 SlimSealed BOX THIELE-SMALL Parameters SpecificationsDimensions MS-10SD2 Slim MS-10SD4 SlimPage MS-SERIE Slim BedienungsanleitungZUR Gehäuseauswahl Subwoofer AN DEN Verstärker AnschliessenModelle Anleitung FÜR DIE Errechnung DES GehäuseinnenvolumensEmpfohlene Gehäuse BASSREFLEX-GEHÄUSEGeschlossenes Gehäuse AbweichungAbmessungen SpezifikationenTHIELE-SMALL Parameter Page Série MS Slim Manuel DE L’UTILISATEURChoix D’UN Caisson Connexion DE Votre Subwoofer a Votre AmplificateurBoîte Rectangulaire Enceintes ProposéesBoîte Ventilée Représente ici l’impédanceBoîte Fermée Spécifications Paramètres DE THIELE-SMALLPage Manual DEL Propietario Elección DE UN Recinto Conexión DEL Altavoz DE Subgraves AL AmplificadorCaja Ventilada Instrucciones DE Cálculo DE Volumen Interno DE CarcasasCarcasas Sugeridas Caja RectangularCaja Sellada Parámetros DE THIELE-SMALL DimensionesEspecificaciones Page MS Serie Slim Handleiding Voor DE GebruikerEEN Behuizing Kiezen Aansluiten VAN DE SubwooferGeventileerde Doos Gesuggereerde LuidsprekerboxenModels Rechthoekige DoosAfgesloten Doos UitwijkingSpecificaties AfmetingenPage Serie MS Slim Manuale DELL’UTENTEScegliere UN Mobile Collegamento DEL Subwoofer ALL’AMPLIFICATORECassa Rettangolare Cassa a Trapezio Rettangolo Istruzioni PER IL Calcolo DEL Volume Interno Delle CasseCasse Consigliate Dove w è l’impedenzaEscursione Cassa ChiusaCassa CON Condotto DI Accordo Parametri THIELE-SMALL DimensioniCaratteristiche Page Seria MS Slim Podręcznik UżytkownikaWybór Obudowy Podłączanie Głośnika Niskotonowego Do WzmacniaczaSposób Obliczenia Wewnętrznej Objętości Obudowy Sugerowane ObudowyObudowa Wentylowana Gdzie w to nominalnaObudowa Zamknięta Wymiary SpecyfikacjaParametry THIELE’A-SMALLA Page MS-SERIENS Slim BruksanvisningVälja Låda Anslutning AV Bashögtalaren Till FörstärkarenVentilerad Låda Föreslagna LådorLådors Interna Volymer Beräkningsanvisningar Rektangulär Låda Trapetsoid Rektangulär LådaTäta Låda Mått SpesifikasjonerTHIELE-SMALL-PARAMETRAR Page Brugerhåndbog Valg AF Indkapsling Forbindelse AF Subwooferen TIL ForstærkerenModeller Vejledning TIL Beregning Indkapslingers Indvendige VolumenForeslåede Indkapslinger Ventileret KasseLukket Kasse MÅL SpecifikationerYderligere Parametre Page Subwoofere med dobbel talespole Valg AV Kabinett Tilkoble Subwooferen TIL ForsterkerenVentilert Boks Forslag TIL AvlukkerInternt Kabinettvolum Kalkuleringsinstruksjoner Rektangulær BoksForseglet Boks THIELE-SMALL Parametre Page Käyttöopas Kotelotyypin Valitseminen Subwooferin JA Vahvistimen KytkeminenMallit Suositellut KotelotilatUpotustilojen Sisäisen Tilavuuden Laskentaohjeet Suljettu Laatikko LaatikkoMitat Tekniset TiedotTHIELE-SMALL-MUUTTUJAT Page Manual do Proprietário Escolha DA Caixa Conexão do Subwoofer COM O AmplificadorCaixa Retangular Compartimentos SugeridosCaixa Dutada Onde W é a impedânciaCaixa Selada Deslocamento mmDimensões EspecificaçõesParâmetros THIELE-SMALL Page MS Serİsİ Slim Kullanici KilavuzuKutu Seçİmİ Subwooferinizi Amplİfİkatörünüze BağlamaÖnerİlen Kutular Kutu İÇ Hacmİ Hesaplama BİlgİlerİGezinim Kapali KutuHavalandirmali Kutu Boyutlar ÖzellİklerEK Parametreler Page Серии MS Slim ПользователяВыбор Корпуса 28l 1 ft³ 5cм x 17,75cм 3 in x 7 ВнутреннийSPL vs Частота Cмещение vs Частота Шумовая мощность Пиковая Номинальный диаметрНоминальное полное сопротивление +2 ом 1000ВтPage MS Slim 系列 选择音箱外壳 音箱内部容积计算说明 MS-10SD2 SLIM, MS-10SD4 Slim Hvc 音圈的绕组深度 Le @ 1 千赫 音圈电感 @ 1 千赫Qms Qes Qts Hag 气隙高度 Incorporated 在美国及/或其它国家注册的商标。配置、规格及外观 可随时更改、恕不另行通知。

MS-10SD2 SLIM, MS-10SD4 SLIM specifications

JBL, a renowned name in the audio industry, has introduced its remarkably designed subwoofers—the JBL MS-10SD4 SLIM and MS-10SD2 SLIM. These models are engineered to impress audiophiles and casual listeners alike with their compact size and powerful performance, making them suitable for a variety of vehicle audio systems.

The JBL MS-10SD4 SLIM subwoofer features a dual 4-ohm voice coil configuration, while the MS-10SD2 SLIM comes with a dual 2-ohm voice coil setup. This flexibility in voice coil impedance allows users to tailor their systems for optimum performance, achieving high-quality sound with various amplifier configurations. Both models are designed to deliver deep, rich bass, thanks to advanced sound engineering that maximizes the acoustic output.

One of the standout characteristics of the MS-10SD series is its slim profile. Measuring significantly less in height compared to traditional subwoofers, these models are perfect for vehicles with limited space, without compromising sound quality. This slim design enables easy installation under seats or in tight corners, making them ideal for compact cars or trucks.

The subwoofers are equipped with a robust thermoplastic compound cone that provides durability and excellent sound reproduction. This material not only enhances the longevity of the subwoofer but also ensures that the bass remains tight and punchy, whether you're blasting your favorite tunes or enjoying the subtle nuances of a movie soundtrack.

Moreover, the JBL MS-10SD SLIM series employs a high-temperature voice coil, ensuring resilience even during prolonged use at high power levels. This feature effectively prevents overheating, allowing users to enjoy their audio experience without interruptions. The models also include a custom-designed rubber surround that aids in reducing distortion, enhancing clarity across all frequencies.

Another innovative technology present in these subwoofers is the powerful magnet system that provides a strong magnetic field, enhancing efficiency and output. This design element ensures that the JBL MS-10SD4 and MS-10SD2 work seamlessly with various amplifiers, ensuring a dynamic audio performance that elevates any audio system.

In conclusion, the JBL MS-10SD4 SLIM and MS-10SD2 SLIM subwoofers offer an excellent combination of compact design, powerful performance, and advanced technologies. With their high-quality construction and innovative features, they promise an enhanced audio experience, making them a top choice for anyone seeking to elevate their in-car sound system while maintaining space efficiency.