Smeg CIR34XS manual GAS Connection

Page 9

Instructions for the installer

3 GAS CONNECTION

This appliance is suitable for installation with Natural Gas or ULPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of ULPG (propane) appliances.

Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be:

1.annealed copper pipe or;

2.flexible hose according to AS/NZ1869 & be at least Class “B”, 10 mm diameter.wqertttt

The appliance must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply.

Before the appliance is operated make certain all relevant parts are placed in the correct position.

When the installation is completed the installation connections of appliance will require to be leak tested, the burner operating pressure and flame checked and adjusted.

Warranty service calls do not cover these adjustments!

To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed.

N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0kPa after installation.

U.L.P.G. Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75kPa.

11

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contents Instructions for Safe and Proper USE IntroductionDeclines ALL Responsibility for Improper USE Never Unplug by Pulling on the CablePlate on the Casing Must not be Removed Instructions for the installer Positioning of the HOBAttachment to the support structure Fixing 90 cm hobs on 60 cm base unit Clearance above and around domestic appliances Requirements Room ventilation Discharge of combustion products GAS Connection This plate for any reason Electrical ConnectionAdaptation to Different Types of GAS Removing the hob models with built-in control panel Adjustment for UlpgAdjustment for natural gas Final Operations Adjustment of minimum for natural gasBurners Cm hobsLubrication of gas taps Practical advice for using the burners Using the HOBInstructions for the user Ignition of the burnersDiameter of containers Using the electric elementsElectric elements Turning on electric elementsTo use correctly remember to Cleaning and Maintenance CleaningCleaning of cooking hob components Preventive maintenance Electric elementCover Problem Problems and CausesCause What to doPage 914771851/ C

CIR34XS specifications

The Smeg CIR34XS is a remarkable built-in electric cooktop that combines elegance with cutting-edge technology. This contemporary appliance reflects Smeg’s commitment to producing high-quality kitchen equipment infused with Italian design aesthetics. With its sleek stainless-steel finish and smooth glass surface, the CIR34XS not only elevates the kitchen’s look but also offers exceptional functionality.

One of the standout features of the CIR34XS is its induction cooking technology. This method utilizes electromagnetic energy to directly heat cookware, delivering rapid and precise cooking results while ensuring the surface remains cool to the touch. This makes it an energy-efficient option, as heat is generated only when pans are in place, significantly reducing wasted energy and keeping the kitchen environment comfortable.

The cooktop features four highly responsive induction zones, each equipped with a booster function that allows for quick heating. This is particularly useful for bringing water to a boil or for sautéing ingredients with remarkable speed. The zones come in various sizes, accommodating different cookware dimensions and ensuring an optimal cooking experience.

Safety is a priority with the Smeg CIR34XS. The cooktop is equipped with several safety features including residual heat indicators, which alert users when the surface is still warm. Additionally, a child lock function provides peace of mind for families, preventing accidental activation by young children. The automatic shut-off feature also ensures that the cooktop will turn off after a designated period of inactivity, reducing the risk of overheating.

User convenience is further enhanced by the touch controls, which allow for easy temperature adjustments and settings. The layout is designed for intuitive use, making it simple even for novice cooks to operate. The sleek design also means that cleaning is effortless; the smooth, flat surface can be wiped down quickly, preventing food residue from becoming baked onto the cooktop.

Overall, the Smeg CIR34XS is a blend of style, efficiency, and practicality, making it a wise investment for modern kitchens. With its advanced induction technology, user-friendly interface, and safety features, it stands out as a top choice for anyone looking to elevate their cooking experience. Whether you're preparing a family meal or experimenting with new recipes, the CIR34XS delivers performance that can meet the demands of passionate home chefs.
Top Page Image Contents