Smeg CIR900X manual GAS Connection

Page 13

Instructions for the Installer

9. GAS CONNECTION

This appliance is suitable for installation with Natural Gas or ULPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of ULPG (propane) appliances. Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be:

1annealed copper pipe or;

2flexible hose according to AS/NZ1869 & be at least Class “B”, 10 mm diameter.

The appliance must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply. Before the appliance is operated make certain all relevant parts are placed in the correct position. When the installation is completed the installation connections of appliance will require to be leak tested, the burner operating pressure and flame checked and adjusted. Warranty service calls do not cover these adjustments! To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed. N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0 kPa after installation.

U.L.P.G. Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75kPa.

15

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety PrecautionsInstructions for the User Before InstallationGetting to Know Your Appliance Gas hob Using the HOBPan diameters Practical hints for using the burnersCleaning stainless steel Cleaning and MaintenanceCleaning the gas components Installing the Appliance Instructions for the InstallerFitting the appliance in the top Instructions for the Installer Requirements Discharge of combustion products Room ventilationGAS Connection Nameplate must never be removed Electrical connectionChanging the hob nozzles Adapting to Different Types of GASBurner Burner and nozzle characteristics tableAdjusting the minimum for bottled gas Adjusting the minimum setting for natural gasFinal Operations for GAS Appliances Greasing the gas tapsPage Page 914772987/ B

CIR900X specifications

The Smeg CIR900X is a state-of-the-art induction cooktop that combines cutting-edge technology with a sleek aesthetic, making it a focal point in any modern kitchen. Known for its efficient cooking capabilities and user-friendly features, the CIR900X is designed to meet the demands of both novice cooks and culinary enthusiasts.

One of the standout features of the Smeg CIR900X is its induction cooking technology. This method uses electromagnetic energy to rapidly heat cookware, providing precise temperature control and quick cooking times. The result is a powerful heating element that responds immediately when adjusted, allowing users to bring water to boil faster than traditional electric or gas cooktops. This responsiveness not only enhances cooking efficiency but also improves safety, as the cooktop surface remains cool to the touch, reducing the risk of burns.

The CIR900X boasts an intuitive touchscreen control panel that simplifies operation. Featuring multiple cooking zones, each with its own independent settings, users can easily prepare different dishes simultaneously. The cooktop also includes a booster function for each zone, providing an extra burst of heat for rapid cooking when needed. For added convenience, the simmering mode allows for gentle heat, perfect for delicate sauces or warming dishes.

Safety is a top priority in the design of the Smeg CIR900X. The cooktop includes features such as automatic shut-off, which activates after a prolonged period of inactivity, and child lock settings to prevent accidental activation, making it suitable for families with children. Additionally, the residual heat indicator alerts users when the surface is still hot, enhancing overall safety in the kitchen.

The smooth ceramic glass surface of the CIR900X not only offers a modern look but also makes cleaning a breeze. Spills can be easily wiped away, and the lack of grates or burners prevents food from becoming trapped, maintaining a hygienic cooking environment.

In terms of energy efficiency, induction cooktops like the Smeg CIR900X consume less energy than traditional cooking methods, making them an environmentally friendly choice. The ability to control energy usage more precisely also allows for reduced electricity costs.

Overall, the Smeg CIR900X combines advanced induction cooking technology with a host of features geared toward convenience, safety, and efficiency. Its modern design and intuitive controls make it a perfect addition to any contemporary kitchen, appealing to those who appreciate both form and function in their cooking appliances.
Top Page Image Contents