Smeg A42-5, A42-2, A42A-5, A42A-2 manual Demo Function

Page 15

Instructions for the user

Cooking start: as well as setting a cooking duration time, the user can also set the cooking start time (up to 12 hours after the current time). To set the cooking start/end time, proceed as follows.

-Set the cooking duration time as described in the previous point.

-Within 6/7 seconds after the last time the or keys are pressed, press the key to set the cooking start time. The display will show the current time with the inside segments indicating the

cooking end time illuminated. Use the and keys to set the cooking start time.

-6/7 seconds after the last time a key is pressed, the display will show the current time and the cooking start and end times, indicated by the illuminated inside segments. The segments on the display will be constantly on until the current time is the same as the cooking start time; as soon as the current time reaches the cooking start time set, all the inside segments will start to flash, indicating that the oven has started cooking.

-When the end of the cooking time is reached, the timer will switch off the oven heating elements, the beeps will start and the numbers on the dial will flash.

-To reset the entire program set, keep the central key pressed for 1 or 2 seconds: if cooking has already started the oven will have to be switched off by hand.

- The image on the right shows an example of programming: the current time is 7.06 and cooking is programmed to start at 8 o'clock and finish at 9.

- At 8 o'clock, the inside segments between 8 and 9 will start to flash and the hour pointer will remain still.

Caution: for the oven to start cooking after the programming procedure just described, the thermostat and function selector must be properly set on the temperature and function required.

5.2.4 "DEMO" Function

Models with analogue/digital programmer feature a "DEMO" function which deactivates the heating elements while leaving the other functions

unchanged. To activate it, simply press the , and keys for 3/4 seconds. A confirmation beep will inform the user that the function is active. To deactivate it, simply repeat the same procedure.

46

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Contents Instructions for Safe and Proper USE IntroductionPlate Must Never be Removed Installation of the Appliance Electrical connectionThis plate must never be removed Twin oven model Ventilation requirements Connecting to natural and LPG gasChanging nozzles Adaptation to Different Types of GASNatural GAS G20 20 mbar Burner and nozzle characteristics tableArrangement of burners on cooking hob LPG G30/G31 28/37 mbarPositioning and levelling of the appliance Adjustment of minimum for natural gasFinal Operations Regulation of minimum for LPGFront control panel Description of SymbolsCooking HOB Burner Command Knob Description of ControlsAuxiliary Oven Variable Grill Knob Auxiliary Oven Thermostat KnobSetting the time Electronic Analogue ClockList of Functions Minute-minder Programming Demo Function Lighting of the cooking hob burners USE of the Cooking HOBPractical advice for using the cooking hob burners USE of the OvensDiameter of containers Available Accessories From 50 to 250C Function Switch Thermostat Selector SwitchCooking Hints Hot-air cookingGrill cooking Function SwitchThermostat Switch in Position Hot-air grillingDefrosting Traditional cookingThermostat in Position Function Switch Variable Grill Choice Between MIN. and MAX Delicate cookingVariable grill cooking Spit cooking Cleaning and Maintenance Cleaning stainless steelCleaning of cooking hob components Burner caps and flame cap crowns Cleaning the inside of the ovenSelf-cleaning liners Using the self-cleaning linersLooking after the self-cleaning liners 10.3.4Assembling the self-cleaning linersDoor glass Replacement of light bulbs Extraordinary MaintenanceRemoving the door Oven door gasketsLubrication of gas taps
Top Page Image Contents