Instructions for the installer
Twin oven model
The appliance comes with a terminal board on the back for electrical hook-up (see following diagram). To open the terminal board cover, remove the fixing screw and raise the cover.
1 - For operation on 220-240V∼: use a three-pole H05RR-F type cable (3 x 2.5 mm2). This is the connection carried out in the factory.
2 - For operation on 220-240V3∼: use a 
four-pole H05RR-F type cable (4 x 1.5
mm2).
3 - For operation on 380-415V2N∼: use a four-pole H05RR-F type cable (4 x 1.5 mm2).
The cable end to be connected to the appliance must be provided with an ground wire (yellow-green) at least 20 mm longer.
36
