Smeg KSE912NX manual Use, Control board

USE

Control board

Key	Function	Display
A	Switches the motor on and off at the latest	Indicates the selected speed
	selected speed
B	Decreases the suction speed.	-
C	Increases the suction speed.	-
D	By pressing this key it is possible to start the	HI and the remaining time appear alternately.
	intensive speed from any previously selected	The spot down at the right side flashes once a
	speed. This speed has been timed at 10 min-	second.
	utes. After that time the system activates auto-
	matically the latest selected speed. This func-	By pressing the key the function is stopped.
	tion is recommended for cooking condition
	where vapours and odours need to be elimi-
	nated immediately and quickly.
E	By pressing this key it is possible to set up the	24 appears and the spot down at the right side
	motor to a suction speed at 100 m3/h. During	flashes while the motor is on.
	the intensive speed or the Delay-function this
	function cannot be activated.	By pressing the key the function is stopped.
F	By pressing this key it is possible to set the	The suction speed and the remaining time be-
	delayed shutdown of the hood to 30 minutes.	fore the hood shut down appear alternately The
	This function is suitable for a complete elimi-	spot down at the right side flashes.
	nation of residual cooking odours. Functioning
	only when the motor is on(not during the 24H-	By pressing the key the function is stopped
	function or intensive function)
G	By pressing this key for about 2 seconds it is	After 100 working hours a FF appears. Metal
	possible to reset the filter saturation alarm.	grease filters have to be washed.
		After 200 working hours EF appears. Charcoal
		filters have to replaced.
H	By pressing this key the intensity of the light-
	ing system can be decreased cyclically.
I	Switches on/off the lighting system at the
	maximum intensity.
L	By pressing this key the intensity of the light-
	ing system can be increate intensity.

Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and lights are switched off.

By pressing the D-key (Intensive function) the keyboard block can be activated or deactivated. This fun- ction is confirmed by a Beep and by moving motor LEDS on display.

EN	2
	25