Smeg SA9058X manual Using the Oven, General warnings and advice, Cooling ventilation

Page 15

User Instructions

8 USING THE OVEN

Before using the oven in models with an electronic programmer, make sure that the symbol appears on the display.

For models with a clockface and hands, and a timer control, set the programmer to .

8.1General warnings and advice

When using the oven and the grill for the first time, they should be heated to their maximum temperature (260°C for an electric oven, 275°C for a gas oven) for a long enough period to burn off any oily residues from the manufacturing process which may give the food disagreeable odours. After

a power outage, the oven display will flash constantly and the symbol will be displayed. To set the display, see paragraph "8. ELECTRONIC PROGRAMMER (ONLY APPLIES TO MODELS EQUIPPED WITH ONE)”.

The oven accessories which may come into contact with food have been made using materials that conform to the provisions of the applicable directive.

ATTENTION: A gas oven must be lit with the door open. The oven is equipped with a safety system to prevent the burner from lighting when the door is closed. If there is a problem, open the door and wait a few moments before relighting.

To avoid being affected by any steam inside the oven, open the door in two stages: initially open it slightly (around 5 cm) for 4 or 5 seconds then open it completely. If the preparation process requires some time, leave the door open as little as possible to prevent the temperature inside the oven from falling too fast and adversely affecting the cooking process.

8.2Cooling ventilation

When the oven is lit, a cooling system starts to operate after a few minutes have passed. The operation of the fans causes a normal flow of air to emerge from under the door, and this may continue for a short period even after the oven has been turned off.

8.3Using the electric grill

8.3.1Using the grill in cooking ranges

For brief cooking processes, for example browning meat which has already been cooked at the end of

the cooking process, select the static grill function or and set the thermostat to the maximum temperature. The fan-assisted grill function enables complete cooking to be effected due to the forced ventilation which allows the heat to penetrate inside the food. For this type of cooking, select the fan-

assisted grill function and set the thermostat to the correct cooking temperature (no more than 200°C).

17

Image 15
Contents Contents Do not Remove this Plate for ANY Reason Instructions Safety and USEIntroduction Never Attempt to Repair the Appliance YourselfIntroduction Instructions for Disposal OUR Enviromental Care Instructions for disposalInstructions for the installer Installation of the ApplianceElectrical connection Gas connection Discharge of combustion products Room ventilationRequirements Clearance above and around domestic cookersReplacing the hob injectors Adaptation to Different GAS TypesNominal gas Turn-down gas Injector Consumption MJ/h Burner and nozzle characteristics tableBurner arrangement on the hob BurnerFinal Procedures Regulation of the hob burner minimum level for UlpgWall fixing Electric Oven Thermostat Knob User InstructionsDescription of Controls on the Front Panel HOB Burner Control KnobMultifunction Electric Oven Function Knob Cookware diameter 90 cm model Using the HOBPractical advice for the use of the hob burners Lighting the hob burnersUsing the grill in cooking ranges Using the OvenGeneral warnings and advice Using the electric grillUsing the grill Storage compartmentFood Runner Level List of Functions Time settingSemi-automatic cooking Automatic cookingSilencing the buzzer TimerAdjusting the buzzer volume End of cookingAccessories available on request Available AccessoriesCleaning and Maintenance Cleaning stainless steelCleaning the hob components Cleaning the inside of the oven Door glassLighters and thermocouples Demounting the door Extraordinary MaintenanceLubricating the taps and gas oven thermostat Replacing the bulbPage 914779058/ a