Instruction for the user
5 DESCRIPTION OF FRONT PANEL CONTROLS
All the oven controls are grouped together on the front panel. The table below provides a description of the symbols used.
FRONT RIGHT BURNER | GAS OVEN THERMOSTAT KNOB |
BACK RIGHT BURNER | OVEN LIGHT / ROTISSERIE / GRILL |
| SWITCH |
BACK LEFT BURNER | BURNER IGNITION BUTTON |
FRONT LEFT BURNER | ANALOGUE CLOCK |
CENTRAL BURNER | MINUTE COUNTER KNOB |
If the cooker is equipped with an electronic programmer, before using the oven make sure that the symbol 
; appears on the display. See paragraph “8.1 Clock adjustment”.
COOKING HOB BURNER COMMAND KNOB
(CERTAIN MODELS ONLY)
The flame is lit by pressing the knob and turning it anticlockwise to minimum flame 
. To adjust the flame turn the knob between maximum (
) and minimum (
). The burner goes out when the knob is returned to the position .
BURNER IGNITION BUTTON (CERTAIN MODELS ONLY)
In the models fitted with this button (
), the flame is ignited by turning
the knob anticlockwise to the minimum flame setting | , while |
). To adjust the flame, turn the knob to the zone between the maximum (
) and the minimum (
) settings. To turn out the burner, return the knob to the 
position.
GAS OVEN THERMOSTAT KNOB
(CERTAIN MODELS ONLY)
This knob is used to ignite the gas burner inside the oven. The cooking temperature is selected by turning the knob anticlockwise to the desired setting, between Min. and 275°C.
For information on how to ignite the gas oven, see point “ 7.3 Use of the gas oven ”.
37