Smeg JGB95XD1S Electronic Programmer only on Equipped Models, Clock adjustment, Automatic cooking

Page 22

Instruction for the user

8 ELECTRONIC PROGRAMMER (ONLY ON EQUIPPED MODELS)

LIST OF FUNCTIONS

MINUTE-COUNTER KEY

COOKING TIME KEY

END-OF-COOKING KEY

DECREASE TIME KEY

INCREASE TIME KEY

8.1Clock adjustment

When using the oven for the first time, or after a power failure, the display flashes regularly and

indicates . Press the keys and at the same time the keys or : each single press changes the time by 1 minute either up or down.

Before setting the programmer activate the desired function and temperature.

8.2Semiautomatic cooking

Use this setting for automatic oven switch-off at the end of cooking time.

By pressing key , the display lights up, showing ; keep the key pressed and at the same time, press keys or to set the cooking time.

Release key to start the programmed cooking time count. The display will now show the right time together with symbols A and .

8.3Automatic cooking

Use this setting to automatically start and stop the oven.

By pressing key , the display lights up showing ; keep the key pressed and at the same time, press keys or to set the cooking time.

By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at the same time, press keys or to regulate the end of cooking time. Release key to start the programmed count and the display will show the right time together with symbols A and .

After set-up, to see the cooking time remaining, press the key ; to see the end of cooking time press

the key . Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking time and a longer period will not be accepted by the programmer).

46

Image 22

Contents Contents Introduction Instructions for Safe and Proper USELower the Glass Cover Slowly and by Hand Instruction for the installer Installation of the ApplianceVentilation requirements Electrical connectionThis rating plate must never be removed Connecting to natural and LPG gas Please see connection diagramReplacement of nozzles on the hob Adaptation to Different Types of GASCapacity Nozzle By-pass Reduced Flowrate Burner and nozzle characteristics cm. modelsRated Burner Heating G30 G31 100 mmBy-pass Reduced Arrangement of burners on cooking hob Regulation of the primary air on the oven burner Adjustment of the oven burner only for gas oven modelsReplacement of the oven burner nozzle 15 mmRegulation of the hob burner minimum level for LPG Final OperationsRegulation of the hob burner minimum level for natural gas Regulation of the oven burner minimum levelInstruction for the user Description of Front Panel ControlsOven Light Switch Certain Models only USE of the Cooking HOB Practical advice for using the cooking hob burnersLighting of the cooking hob burners Diameter of containers 90 cm. models Diameter of containers 60 cm. models60 X Switching on the electric hobs Switching on the electric hobHow to use the electric hobs Use of the gas oven USE of the OvenCooling system Electronic spark lightingUse of the electric grill How to use the grill Gas bottle compartment certain models only Use of the gas grillStorage compartment Manual lighting of the gas grill burnerSemiautomatic cooking Clock adjustmentElectronic Programmer only on Equipped Models Automatic cookingCancellation of set data Adjusting alarm volumeSwitching off the alarm End of cookingDigital Timer Certain Models only Analogue Clock only on Equipped ModelsCleaning stainless steel and enamelled versions Cleaning and MaintenanceCleaning of cooking hob components Grids Cleaning of ovenDoor glass Burner caps and flame cap crownsLubrication of the taps and gas oven thermostat Extraordinary MaintenanceReplacement of light bulb Removing the door