Smeg KLS1257B, KLS01-2 Adjusting the Water Softening System, Water Hardness Table

Page 8

User instructions

ADJUSTING THE WATER SOFTENING SYSTEM

The dishwasher is equipped with an device for the user to adjust the water softening system according to the hardness of the water supply.

According to the machine model, the selector which acts on the adjustment may be located:

•inside the plastic locking ring located on the right-handside, inside the dishwasher;

•inside the water softener, just below the cap.

Both allow for adjustment to 5 settings:

WATER HARDNESS TABLE

	WATER HARDNESS					SETTING

German Degrees (°dH)			French Degrees (°dF)

0	- 4		0	- 7		Setting N. 1 NO SALT

5 - 15			8 - 25			Setting N. 1

16	- 23		26	- 40		Setting N. 2

24	- 31		41	- 60		Setting N. 3

32	- 47		61	- 80		Setting N. 4

48	- 58		81 - 100			Setting N. 5

Contact your local water board for information on the hardness of your water supply.

Image 8

Contents Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Front panelSwitch Program Cancelling the Current Program Washing programsTable for Certification Bodies Before starting a washing program make sure thatChanging the Program To Save on ENERGY! … and Protect the EnvironmentEND of Cycle Removing the DishesAdjusting the Water Softening System Water Hardness TableFor Cleaning Dishwashers Contents Safety instructions Safety and operating instructionsSafety instructions Aquastop Models Installation and hook-up For free-standing models onlyDrain Connection Connecting to the Water SupplyWater supply connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations Make Sure that the items being washed are dishwasher-safeUser instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower BasketCutlery Basket Upper BasketLoading the Upper Basket Adjusting the Upper Basket Pull-out versionCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the program fails to start, check that If water remains inside the dishwasher, check thatIf the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank135 145