Sound Adjustments
You can also use the remote control for some sound adjustments.
• When using the remote control, see also “Mastering Remote Operations” on page 38.
| CONTROL |
|
|
|
|
|
|
| 5/∞/3/2 | Display |
|
|
|
| INPUT ATT |
STANDBY |
|
|
| HOME CINEMA CONTROL CENTER |
| ||
TV DIRECT |
| DVD | STB | VCR | TV | TAPE | FM/AM |
STANDBY/ON |
|
|
|
|
|
|
|
|
| CONTROL |
| ANALOG | L | C | R | PL ΙΙ SLEEP | AUTO MODE TA HEWS INFO RDS | TUNED ST AUTO MUTING |
|
|
|
|
|
|
| LPCM | SUBWFR LFE DSP HP |
| MH |
|
|
| |||
|
|
|
| DOLBY D | LS | S | RS | AUTO SR |
| KH | INPUT | SURROUND | SURROUND |
|
|
|
| DTS | INPUT ATT |
| VOL | ||||||
PHONES | SETTING | ADJUST | MEMORY |
|
|
|
|
|
|
| ANALOG/DIGITAL | ON/OFF | MODE |
|
|
|
|
|
| MASTER VOLUME |
DVD | STB | VCR | TV | TAPE | FM/AM | INPUT ATT |
ADJUST |
|
|
|
|
|
|
Attenuating the Input Signal | Remote |
NOT |
When the input level of the analogue source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.
•You have to make this adjustment for each analogue source.
Press and hold INPUT ATT (INPUT ANALOG/ DIGITAL) so that the INPUT ATT indicator lights up on the display.
•Each time you press and hold the button, the Input Attenuator turns on (“ATT ON”) or off (“ATT NORMAL”).
INPUT
ANALOG/DIGITAL
INPUT ATT | ANALOG L | R |
INPUT ATT | VOL |
2Press CONTROL ∞ (or 5) repeatedly until “BAL (Balance)” (with the current setting)*
appears on the display.
CONTROL
R |
T | VOL |
*“CENTER” is the initial setting. If you have already changed the setting, another setting will be shown.
3Press CONTROL 3 (or 2) to adjust the front speaker balance.
CONTROL |
|
| |||
ANALOG | L | C | R | PR ΙΙ |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | AUTO SR | VOL |
DTS | INPUT ATT | ||||
Adjusting the Front Speakers | Remote |
Output Balance | NOT |
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speakers output balance.
•You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•Pressing CONTROL 3 decreases the left channel output (from CENTER to L
•Pressing CONTROL 2 decreases the right channel output (from CENTER to R
1Press ADJUST.
ADJUST
The CONTROL buttons now work for sound adjustments.
20
