Creating Realistic Sound Fields
| CONTROL |
|
|
|
|
|
| 5/∞/3/2 Display |
|
|
|
|
|
STANDBY |
|
| HOME CINEMA CONTROL CENTER |
| ||
TV DIRECT | DVD | STB | VCR | TV | TAPE | FM/AM |
STANDBY/ON |
|
|
|
|
|
|
|
| CONTROL | ANALOG | L C R | PL ΙΙ | SLEEP | AUTO MODE TA HEWS | INFO RDS | TUNED ST AUTO MUTING |
|
| ||
|
|
| LPCM | SUBWFR LFE DSP HP |
|
|
|
|
| MH |
|
| |
|
|
| DOLBY D | LS S RS | AUTO SR |
|
|
|
|
| KH | INPUT SURROUND SURROUND | |
PHONES | SETTING | ADJUST | DTS | INPUT ATT |
|
|
|
|
| VOL | |||
MEMORY |
|
|
|
|
|
|
|
| ANALOG/DIGITAL ON/OFF | MODE | |||
|
|
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
|
|
| DVD | STB |
| VCR | TV |
| TAPE | FM/AM | INPUT ATT |
| |
| ADJUST |
|
|
|
|
|
|
|
| SURROUND SURROUND | |||
|
|
|
|
|
|
|
|
|
|
|
| ON/OFF | MODE |
When using the remote control for Surround operations, see pages 33 to 35.
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 15).
•You cannot adjust the center speaker output level when you have set “CNTR SP” to “NO.”
•You cannot adjust the rear speaker output levels when you have set “REAR SP” to “NO.”
•Remember not to change the speaker setting while using any Surround modes; otherwise, it may be canceled when you deactivate the speakers required for the Surround mode.
3 Except for the digital multichannel | MODE |
| SURROUND |
software: Press SURROUND MODE repeatedly to select “PL II MOVIE” or
“PL II MUSIC” according to a playing source.
PL II indicator lights up on the display.
4Press ADJUST.
ADJUST | The CONTROL buttons now work for sound |
| |
| adjustments. |
Using Dolby Pro Logic II, Dolby Digital and
DTS Digital Surround (Front Panel)
Once you have adjusted the Surround modes, the adjustment is memorized for each source.
•When playing back digital multichannel software (Dolby Digital
•No test tone is available when using the buttons on the front panel.
5Press CONTROL ∞ (or 5) repeatedly until one of the following indications (with the current
setting)* appears.
CONTROL
ANALOG | L | C | R | PR ΙΙ |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | AUTO SR | VOL |
DTS | INPUT ATT | ||||
|
|
|
|
|
|
|
|
|
|
|
|
1Select and play software you like.
2 Press SURROUND ON/OFF to activate | SURROUND | |
ON/OFF | ||
| ||
Surround mode. |
|
Each time you press the button, Surround mode turns on and off alternately.
•If you are playing back digital multichannel software such as Dolby Digital
→Go to step 4.
•If you are playing back any software other than above, you can activate Pro Logic II.
→Go to step 3.
If “AUTO SR (Auto Surround)” is set to “ON”
Playing a digital source automatically activates an appropriate Surround mode. (See pages 18 and 19.) → Go to step 4.
CENTER : To adjust the center speaker output level (from
REAR L : To adjust the left rear speaker output level (from
REAR R : To adjust the right rear speaker output level (from
PANORAMA control
:Selectable only when “PL II MUSIC” is selected:
•Select “ON” when you like to enjoy
“wraparound” sound effect with
•Select “OFF” when you like to enjoy originally recorded sound.
*“0” is the initial setting for the speaker output levels, and “OFF” for Panorama control.
If you have already changed the setting, another setting will be shown.
36