To tune in a preset station
1Press FM/AM to select the band.
The last received station of the selected band is tuned in, and the CONTROL buttons now work for tuner operations.
FM/AM
TUNED ST AUTO MUTING
MHZ
R |
T | VOL |
Ex.: When selecting the FM band.
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.
•You can store the FM reception mode for each preset station (see page 24).
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Tuner Operations
2 Press CONTROL ∞ (or 5) repeatedly until | 1 While listening to an FM station, press | ||
“< PRESET >” appears on the display. | CONTROL ∞ (or 5) repeatedly until | ||
|
| “< FM MODE >” appears on the display. | |
CONTROL |
| CONTROL | |
| |||
|
| ||
R ΙΙ | TUNED ST AUTO MUTING |
|
|
|
| ||
O SR | R ΙΙ | TUNED | ST | AUTO MUTING |
T ATT | VOL |
|
|
|
| O SR |
|
|
|
| T ATT |
|
| VOL |
3 While “< PRESET >” still remains on the display, | 2 Press CONTROL 3 (or 2) to select “MONO.” | ||||||
press CONTROL 3 (or 2) to select a preset |
| • Each time you press the button, the FM reception mode | |||||
channel number you want. |
| alternates between “AUTO MUTING”* and “MONO.” | |||||
|
|
|
|
| CONTROL |
|
|
CONTROL |
|
|
|
|
| ||
| ANALOG | L C R PR ΙΙ | TUNED | ||||
|
|
|
| ||||
|
|
|
| LPCM | SUBWFR LFE DSP |
| |
| TUNED ST AUTO MUTING |
| DOLBY D | LS S RS | AUTO SR | VOL | |
|
| DTS | INPUT ATT | ||||
| MHZ |
|
| ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
VOL |
•Pressing (or holding) CONTROL 3 increases the preset channel numbers.
•Pressing (or holding) CONTROL 2 decreases the preset channel numbers.
When using the remote control
1Press FM or AM.
The last received station of the selected band is tuned in, and the 10 keys now work for tuner operations.
2Press the 10 keys to select a preset channel number.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 30, press +10, +10, then 10.
*“AUTO MUTING” is the initial setting. If you have already changed the setting, “MONO” will be shown.
AUTO MUTING : Normally select this.
When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.
MONO | : Select this to improve the reception (but |
| stereo effect will be lost). |
| In this mode, you will hear noise while |
| tuning into the stations. The AUTO |
| MUTING indicator goes off from the |
| display. (The ST indicator also goes off.) |
To restore the stereo effect
Repeat step 1, then select “AUTO MUTING” in step 2.
When using the remote control
1Press FM.
10 keys now work for tuner operations.
2Press FM MODE.
•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”
25
