JVC LVT0858-001A manual Specifications, Amplifier

Specifications

Designs & specifications are subject to change without notice.

Amplifier

Output Power	At Stereo operation:
	Front channels:	60 W per channel, min. RMS, both channels driven
		into 8 Ω at 1 kHz with no more than 0.9% total
		harmonic distortion. (IEC268-3/DIN)
	At Surround operation:
	Front channels:	60 W per channel, min. RMS, driven into 8 Ω at
		1 kHz with no more than 0.8% total harmonic
		distortion.
	Center channel:	60 W, min. RMS, driven into 8 Ω at 1 kHz, with no
		more than 0.8% total harmonic distortion.
	Rear channels:	60 W per channel, min. RMS, driven into 8 Ω at
		1 kHz, with no more than 0.8% total harmonic
		distortion.

Audio				220 mV/47 kΩ
Audio Input Sensitivity/Impedance (1 kHz):	DVD, STB, VCR, TV, TAPE:
Audio Input (DIGITAL IN)* :	Coaxial:	DIGITAL 1	(DVD):	0.5 V(p-p)/75 Ω
	Optical:	DIGITAL 2	(STB):	–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:	VCR, TV, TAPE:		220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):	DVD, STB, VCR, TV, TAPE:		87 dB/62 dB
Frequency Response (8 Ω):	DVD, STB, VCR, TV, TAPE:		20 Hz to 20 kHz (±1 dB)
Tone Control:	Bass (100 Hz):	±10 dB
	Treble (10 kHz):	±10 dB
Bass Boost:	+6 dB ± 1 dB at 70 Hz
Video
Video Input Sensitivity/Impedance (1 kHz):
Composite video:	DVD, STB, VCR, TV: 1 V(p-p)/75 Ω
S-VIDEO:	DVD, STB, VCR:	(Y:luminance):		1 V(p-p)/75 Ω
		(C:chrominance):		0.286 V(p-p)/75 Ω
RGB:	DVD, STB, VCR:	0.7 V(p-p)/75 Ω
Video Output Level/Impedance (1 kHz):
Composite video:	VCR, TV:	1 V(p-p)/75 Ω
S-VIDEO:	TV:	(Y:luminance):		1 V(p-p)/75 Ω
		(C:chrominance):		0.286 V(p-p)/75 Ω
RGB:	TV:	0.7 V(p-p)/75 Ω
Signal-to-Noise Ratio (S/N):	45 dB
Synchronize:	Negative

TO BE CONTINUED ON THE NEXT PAGE

Troubleshooting / Specifications

45