![](/images/new-backgrounds/1022474/2247481x1.webp)
6Press CONTROL 3 (or 2) to make adjustments.
•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the
same level as that of the front speakers.
CONTROL
ANALOG | L | C | R | PR ΙΙ |
|
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | AUTO SR | VOL |
DTS | INPUT ATT |
Ex.: When adjusting the center speaker output level.
7Repeat steps 5 and 6 to adjust the other settings.
To cancel Surround Mode
Press SURROUND ON/OFF again so that “STEREO” appears on the display.
•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer if you have connected a subwoofer and set the subwoofer setting
Using DAP Modes and All Channel Stereo (Front Panel)
Once you have adjusted the DAP modes and All Channel Stereo, the adjustment is memorized for each source.
•You cannot use the DAP modes and All Channel Stereo if no rear speakers are connected.
•You cannot adjust the effect level for “ALL CH ST.”
1Start playing
2Press SURROUND ON/OFF to activate Surround
mode.
When Surround mode turns on, the last selected Surround mode will be activated.
•Each time you press the button, Surround mode turns on and off alternately.
4Press ADJUST.
ADJUST | The CONTROL buttons now work for sound |
| adjustments. |
5Press CONTROL ∞ (or 5) repeatedly until one of the following indications (with the current
setting)* appears.
CONTROL
| ANALOG | L | C | R | PR ΙΙ |
|
|
|
|
| |
| LPCM | SUBWFR LFE DSP |
|
|
|
|
| ||||
| DOLBY D | LS | S | RS | AUTO SR |
|
| VOL |
|
| |
| DTS | INPUT ATT |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CENTER (only for “All CH ST.”) :
To adjust the center speaker output level (from
REAR L : To adjust the left rear speaker output level (from
REAR R : To adjust the right rear speaker output level (from
EFFECT (except “All CH ST.”) :
To adjust the DAP effect level.
As the number increases, the effect becomes stronger (normally set it to “EFFECT 3”).
*“0” is the initial setting for the speaker output levels, and “EFFECT 3” is for the DAP effect level.
If you have already changed the setting, another setting will be shown.
6Press CONTROL 3 (or 2) to make adjustments.
•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.
CONTROL
Creating Realistic Sound Fields
SURROUND |
| ANALOG | L | C | R | PR ΙΙ |
|
| LPCM | SUBWFR LFE DSP |
| ||||
ON/OFF | Ι |
| |||||
|
| DOLBY D | LS | S | RS | AUTO SR | VOL |
| R | DTS | INPUT ATT | ||||
|
|
|
|
|
|
| |
| TT | VOL |
|
|
|
|
|
Ex.: “LIVE CLUB” has been selected.
3Press SURROUND MODE repeatedly until one of the DAP modes or “ALL CH ST.” you like to
apply appears on the display.
The DSP indicator also lights up on the display.
SURROUND |
|
|
| ||
MODE | C | R | PR ΙΙ |
| |
ANALOG | L |
| |||
LPCM | SUBWFR LFE DSP |
| |||
DOLBY D | LS | S | RS | AUTO SR | VOL |
DTS | INPUT ATT |
Ex.: When adjusting the left rear speaker output level.
7Repeat steps 5 and 6 to make other adjustments.
To cancel DAP Modes and All Channel Stereo
Press SURROUND ON/OFF so that “STEREO” appears on the display. The DSP indicator goes off.
(back to the beginning)
37