It will be convenient for you to use the remote control for Surround adjustments, since you can make adjustments from your listening point, and use the test signal.
•When using the buttons on the front panel, see pages 36 and 37.
|
| AUDIO | |
DVD | STB | VCR | TV |
|
| SLEEP | TV DIRECT |
DVD | STB | VCR | TV |
ANALOG/DIGITAL | TAPE | FM | AM |
INPUT |
|
|
|
SOUND | BASS+ | – CENTER + | |
| 1 | 2 | 3 |
TEST | BASS– | – REAR•L + | |
TEST | 4 | 5 | 6 |
BASS BOOST TREBLE+ | – REAR•R + | ||
| 7 | 8 | 9 |
EFFECT | TREBLE– | ||
| 10 | 0 | +10 |
| RETURN | FM MODE | 100+ |
|
| TA/NEWS/INFO |
| |
SURROUND | SURROUND |
| RDS | |
|
| |||
ON/OFF |
| DVD | ||
ON/OFF | PTY( | ENTER | ||
PTY9 | ||||
|
|
| MENU | |
SURROUND | SURROUND |
| DISPLAY MODE | |
MODE |
|
| ||
MODE | PTY SEARCH | DVD MENU |
TV VOL | CHANNEL | VOLUME | |
VCR | TV/VIDEO | DIMMER | MUTING |
CONTROL |
|
|
|
/REW | PLAY | FF/ | |
DOWN | TUNING | UP |
RECSTOPPAUSE
HOME CINEMA CONTROL CENTER
Before you start, remember...
•Make sure that you have set the speaker information correctly (see page 15).
•You cannot adjust the center speaker output level when you have set “CNTR SP” to “NO.”
•You cannot adjust the rear speaker output levels when you have set “REAR SP” to “NO.”
•Remember not to change the speaker setting while using any Surround modes; otherwise, it may be canceled when you deactivate the speakers required for the Surround mode.
Using Dolby Pro Logic II, Dolby Digital and DTS Digital Surround
(Remote Control)
Once you have adjusted the Surround modes, the adjustment is memorized for each source.
•When playing back digital multichannel software (Dolby Digital
•For selecting Panorama control for Pro Logic II Music, use the buttons on the front panel.
1Select and play software you like.
2 Press SURROUND ON/OFF to activate | SURROUND |
Surround mode. | ON/OFF |
|
Each time you press the button, Surround mode turns on and off alternately.
•If you are playing back digital multichannel software such as Dolby Digital
→Go to step 4.
| L C |
| R |
| |||
|
|
|
|
|
|
|
|
SUBWFR LFE |
| ||||||
DOLBY D |
|
|
|
| |||
| LS |
| RS | VOL | |||
|
|
|
|
|
|
|
|
Ex.: When Dolby Digital is activated.
•If you are playing back any software other than above, you
can activate Pro Logic II.
→ Go to step 3.
If “AUTO SR (Auto Surround)” is set to “ON”
Playing a digital source automatically activates an appropriate Surround mode. (See pages 18 and 19.) → Go to step 4.
3 Except for the digital multichannel | MODE |
| SURROUND |
software: Press SURROUND MODE repeatedly to select “PL II MOVIE” or
“PL II MUSIC” according to a playing source.
PL II indicator lights up on the display.
| L |
|
|
| R | PL ΙΙ |
LPCM | SUBWFR |
|
| |||
|
|
|
VOL |
4Press TEST to check the speaker output balance.
TEST
PR ΙΙ |
|
P |
|
TO SR |
|
PUT ATT | VOL |
“TEST L” starts flashing on the display, and a test tone comes out of the speakers in the following order:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (Left front speaker) |
| (Center speaker) | (Right front speaker) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
| (Left rear speaker) |
| (Right rear speaker) |
Notes:
•You can adjust the speaker output levels without outputting the test tone.
•No test tone comes out of the center speaker when “CNTR SP” is set to “NO.”
•No test tone comes out of the rear speakers when “REAR SP” is set to “NO.”
TO BE CONTINUED TO THE NEXT PAGE
Creating Realistic Sound Fields
33