Troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
|
|
The STANDBY lamp lights up after | The unit is overloaded because of a | Press STANDBY/ON | on the front panel |
turning on the power, but soon the unit | high voltage. | to turn off the unit. After unplugging the | |
turns off (into standby mode). |
| power cord, consult your dealer. | |
|
|
| |
Remote control does not operate as you | The remote control is not ready for | Press SOUND or a source selecting button | |
intend. | your intended operation. | first, then press the buttons you want to use. | |
|
| (See pages 39 and 40.) |
|
|
|
|
|
Remote control does not work.
There is an obstruction hiding the | Remove the obstruction. |
remote sensor on the unit. |
|
|
|
Batteries are weak. | Replace batteries. |
|
|
RDS/DVD MENU selector is set to the | Set RDS/DVD MENU selector to the proper |
incorrect position. | position. |
Note:
When you use the digital coaxial connection, the sounds may be intermitted by the outside noise such as a lightning discharge but they will restore automatically. This is not a malfunction.
44
