
MON1 Terminal Meter Selection
Program ⇒ Terminal ⇒ Analog Output Terminals
This parameter is used to set the output function of the MON1 analog output terminal. The available assignments for this output terminal are listed in Table 6 on pg. 239.
The MON1 analog output terminal produces an output voltage or current that is proportional to the magnitude of the function assigned to this terminal.
Note: The Expansion IO Card Option 2 option board (P/N ETB004Z) is required to use this terminal.
Direct Access Number — F672
Parameter Type — Selection List
Factory Default — Output Voltage
Changeable During Run — Yes
See the Expansion IO Card Option 2 instruction manual (P/N 58686) for more information on the function of this terminal.
MON1 Terminal Setup Parameters
F672 | — MON1 Output Function |
F673 | — MON1 Terminal Meter Adjustment |
F688 | — MON1 Voltage/Current Output Switching |
F689 | — MON1 Output Gradient Characteristic |
F690 | — MON1 Bias Adjustment Set Zero Level |
MON1 Terminal Adjustment | Direct Access Number — F673 | |
Program ⇒ Terminal ⇒ Analog Output Terminals | Parameter Type — Numerical | |
This parameter is used to set the gain of the MON1 output terminal and is used | Factory Default — 512 | |
Changeable During Run — Yes | ||
in conjunction with the settings of parameter F672. | ||
| ||
| Minimum — 1 | |
See parameter F672 for more information on this setting. | Maximum — 1280 | |
| ||
|
| |
MON2 Terminal Meter Selection | Direct Access Number — F674 | |
Program ⇒ Terminal ⇒ Analog Output Terminals | Parameter Type — Selection List | |
| Factory Default — Output Frequency |
This parameter is used to set the output function of the MON2 analog output
Changeable During Run — Yes
terminal. The available assignments for this output terminal are listed in Table 6 on pg. 239.
The MON2 analog output terminal produces an output voltage or current that is proportional to the magnitude of the function assigned to this terminal.
Note: The Expansion IO Card Option 2 option board (P/N ETB004Z) is required to use this terminal.
See the Expansion IO Card Option 2 instruction manual (P/N 58686) for more information on the function of this terminal.
MON2 Terminal Setup Parameters
F674 — MON2 Output Function
F675 — MON2 Terminal Meter Adjustment
F691 — MON2 Voltage/Current Output Switching
F692 — MON2 Output Gradient Characteristic
F693 — MON2 Bias Adjustment Set Zero Level
H9 ASD Installation and Operation Manual | 195 |