F970 |
| F971 | |
|
|
| |
Monitor Output Function Command 31 | Direct Access Number — | F970 | |
Program ⇒ My Function ⇒ My Function Monitor | Parameter Type — Selection List | ||
This parameter plays a role in the setup of the My Function feature by allowing | Factory Default — Normal |
| |
Changeable During Run — Yes | |||
the user to select the Peak, Minimum, or Normal (Avg.) value of the | |||
|
| ||
parameter F969 selection to be recorded and output as a monitored function. |
|
| |
See the My Function Instruction Manual (P/N 58692) for a complete |
|
| |
description of the setup requirements and operational information of the |
|
| |
Monitor Output Function parameter. |
|
| |
Settings: |
|
| |
0 — Normal |
|
| |
1 — Peak |
|
| |
2 — Minimum |
|
| |
|
|
| |
Monitor Output Function 41 | Direct Access Number — | F971 | |
Program ⇒ My Function ⇒ My Function Monitor | Parameter Type — Selection List | ||
| Factory Default — 2000 |
| |
This parameter plays a role in the setup of the My Function feature by
establishing the function that is to be recorded and output as the Peak, Minimum, or Average value as selected at parameter F971.
Changeable During Run — Yes
Select the Monitor Display Input Setting number from Table 10 on pg. 243 to output the corresponding function.
Use the Communication Number if operating using communications.
See the My Function Instruction Manual (P/N 58692) for a complete description of the setup requirements and operational information of the Monitor Output Function parameter.
Monitor Output Function Command 41
Program ⇒ My Function ⇒ My Function Monitor
This parameter plays a role in the setup of the My Function feature by allowing the user to select the Peak, Minimum, or Normal (Avg.) value of the parameter F971 selection to be recorded and output as a monitored function.
Settings:
0 — Normal
1 — Peak
2 — Minimum
Direct Access Number — F972
Parameter Type — Selection List
Factory Default — Normal
Changeable During Run — Yes
See the My Function Instruction Manual (P/N 58692) for a complete description of the setup requirements and operational information of the Monitor Output Function parameter.
H9 ASD Installation and Operation Manual | 231 |
