F166 F169, Input Terminal 19 B14 Function

F166

This parameter is used to set the functionality of the B14 discrete input terminal.

In addition, this input terminal must be specified as Normally Open or Normally Closed.

This setting assigns the function of the programmable B14 terminal to any one of the user-selectable functions listed in Table 5 on pg. 236.

See the My Function Instruction Manual (P/N 58692) for more information on the function of this terminal.

Direct Access Number — F166

Parameter Type — Selection List

Factory Default — Unassigned

Changeable During Run — No

Input Terminal 20 (B15) Function	Direct Access Number —	F167
Program ⇒ Terminal ⇒ Input Terminals	Parameter Type — Selection List
This parameter is used to set the functionality of the B15 discrete input	Factory Default — Unassigned
	Changeable During Run — No
terminal.	Changeable During Run — No
terminal.
In addition, this input terminal must be specified as Normally Open or
Normally Closed.
This setting assigns the function of the programmable B15 terminal to any one
of the user-selectable functions listed in Table 5 on pg. 236.
See the My Function Instruction Manual (P/N 58692) for more information
on the function of this terminal.

Output Terminal 10 (R3) Function	Direct Access Number —	F168
Program ⇒ Terminal ⇒ Output Terminals	Parameter Type — Selection List
This parameter sets the functionality of the R3 output terminal to any one of the	Factory Default — OFF
	Changeable During Run — No
user-selectable functions listed in Table 8 on pg. 241.	Changeable During Run — No
user-selectable functions listed in Table 8 on pg. 241.
In addition, the output terminals must be specified as Normally Open or
Normally Closed.
See the instruction manual for the 16-bit BIN/BCD option for more
information on the function of this terminal.

Output Terminal 11 (R4) Function	Direct Access Number —	F169
Program ⇒ Terminal ⇒ Output Terminals	Parameter Type — Selection List
	Factory Default — OFF

This parameter sets the functionality of the R4 output terminal to any one of the

user-selectable functions listed in Table 8 on pg. 241.

Changeable During Run — No

In addition, the output terminals must be specified as Normally Open or Normally Closed.

See the instruction manual for the 16-bit BIN/BCD option for more information on the function of this terminal.

H9 ASD Installation and Operation Manual