Toshiba H9 F552 F560, Speed 13 Operation Time, Speed 14 Operation Time, Speed 15 Operation Time

F552		F560
Speed 13 Operation Time	Direct Access Number —	F552
Program ⇒ Pattern Run ⇒ Operation Time	Parameter Type — Numerical
This parameter sets the run-time for Preset Speed #13.	Factory Default — 5.0
	Changeable During Run — Yes
This time is effective when used with Group Speeds and non-Group Speeds.
	Minimum — 0.1
If the Auto-Restartfunction is activated, the search time required for the Auto-
	Maximum — 6000.0
Restart function will be subtracted from the Operation Time setting; resulting
	Units — F520 Setting
in a shorter run time.
Speed 14 Operation Time	Direct Access Number —	F553
Program ⇒ Pattern Run ⇒ Operation Time	Parameter Type — Numerical
This parameter sets the run-time for Preset Speed #14.	Factory Default — 5.0
	Changeable During Run — Yes
This time is effective when used with Group Speeds and non-Group Speeds.
	Minimum — 0.1
If the Auto-Restartfunction is activated, the search time required for the Auto-
	Maximum — 6000.0
Restart function will be subtracted from the Operation Time setting; resulting
	Units — F520 Setting
in a shorter run time.
Speed 15 Operation Time	Direct Access Number —	F554
Program ⇒ Pattern Run ⇒ Operation Time	Parameter Type — Numerical
This parameter sets the run-time for Preset Speed #15.	Factory Default — 5.0
	Changeable During Run — Yes
This time is effective when used with Group Speeds and non-Group Speeds.
	Minimum — 0.1
If the Auto-Restartfunction is activated, the search time required for the Auto-
	Maximum — 6000.0
Restart function will be subtracted from the Operation Time setting; resulting
	Units — F520 Setting
in a shorter run time.
Preset Speed Operation Mode	Direct Access Number —	F560
Program ⇒ Pattern Run ⇒ Operation Mode	Parameter Type — Selection List
	Factory Default — Disabled

This parameter is used to set the Preset Speed operating mode.

Changeable During Run — No

Select Disabled at this parameter to use the speed command only for Preset Speed operation.

Select Enabled at this parameter to apply the control settings of F561 – F575 to the associated Preset Speed while operating in the Preset Speed mode.

Settings:

0 — Disabled (Preset Speed Only)

1 — Enabled (Full Preset Speed Mode)

H9 ASD Installation and Operation Manual 179