Input Terminal 4 (RES) Function
Program ⇒ Terminal ⇒ Input Terminals
This parameter is used to set the functionality of the RES discrete input terminal.
In addition, this input terminal must be specified as Normally Open or Normally Closed.
This parameter sets the programmable RES terminal to any one of the user- selectable functions listed in Table 5 on pg. 236.
Direct Access Number — F114
Parameter Type — Selection List
Factory Default — Reset
Changeable During Run — No
Input Terminal 5 (S1) Function | Direct Access Number — | F115 | |
Program ⇒ Terminal ⇒ Input Terminals | Parameter Type — Selection List | ||
This parameter is used to set the functionality of the S1 discrete input terminal. | Factory Default — Preset Speed 1 | ||
Changeable During Run — No | |||
In addition, this input terminal must be specified as Normally Open or | |||
|
| ||
Normally Closed. |
|
| |
This parameter sets the programmable S1 terminal to any one of the user- |
|
| |
selectable functions listed in Table 5 on pg. 236. |
|
| |
|
|
| |
Input Terminal 6 (S2) Function | Direct Access Number — | F116 | |
Program ⇒ Terminal ⇒ Input Terminals | Parameter Type — Selection List | ||
This parameter is used to set the functionality of the S2 discrete input terminal. | Factory Default — Preset Speed 2 | ||
Changeable During Run — No | |||
In addition, this input terminal must be specified as Normally Open or | |||
|
| ||
Normally Closed. |
|
| |
This parameter sets the programmable S2 terminal to any one of the user- |
|
| |
selectable functions listed in Table 5 on pg. 236. |
|
| |
|
|
| |
Input Terminal 7 (S3) Function | Direct Access Number — | F117 | |
Program ⇒ Terminal ⇒ Input Terminals | Parameter Type — Selection List | ||
This parameter is used to set the functionality of the S3 discrete input terminal. | Factory Default — Preset Speed 3 | ||
Changeable During Run — No | |||
In addition, this input terminal must be specified as Normally Open or | |||
|
| ||
Normally Closed. |
|
| |
This parameter sets the programmable S3 terminal to any one of the user- |
|
| |
selectable functions listed in Table 5 on pg. 236. |
|
| |
|
|
| |
Input Terminal 8 (S4) Function | Direct Access Number — | F118 | |
Program ⇒ Terminal ⇒ Input Terminals | Parameter Type — Selection List | ||
| Factory Default — Preset Speed 4 | ||
This parameter is used to set the functionality of the S4 discrete input terminal.
In addition, this input terminal must be specified as Normally Open or Normally Closed.
This parameter sets the programmable S4 terminal to any one of the user- selectable functions listed in Table 5 on pg. 236.
Changeable During Run — No
H9 ASD Installation and Operation Manual | 89 |
