H9 ASD Installation and Operation Manual 177

Speed 1 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #1.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F540
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting

Speed 2 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #2.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F541
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting

Speed 3 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #3.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F542
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting

Speed 4 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #4.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F543
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting

Speed 5 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #5.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F544
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting

Speed 6 Operation Time

Program ⇒ Pattern Run ⇒ Operation Time
This parameter sets th e run-time for Preset Speed #6.
This time is effective when used wi th Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, th e se a rc h ti me required for the Auto-
Restart function will be subtracted from th e Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F545
Parameter Type — Numeri cal
Factory Default — 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
F540 F545