Monitor Mode
The Monitor mode allows the user to monitor motor performance variables, control settings, and configuration data during motor operation. There are 43 items that may be monitored from this mode. The items are listed and described below.
Note: The Monitor mode is a
Note: Any two of the Underlined monitored items may be selected for display at the Frequency Command screen while running via Program ⇒ Utilities ⇒ Main Monitor Selections.
Note: The F701 setting will determine if the Current and Voltage values displayed appear as A (Amps) or V (Voltage), or if the value is shown as a % (percentage) of the ASD rating.
Frequency at Trip — Display the
Frequency Reference — Displays the Frequency Setpoint (also called the Commanded
Frequency).
Output Current — Displays the Output Current as a percentage of the rated capacity of the H9 ASD.
DC Bus Voltage — Displays the Bus Voltage as a percentage of the rated capacity of the H9 ASD.
Output Voltage — Displays the Output Voltage as a percentage of the rated capacity of the H9 ASD.
AM Output — Displays the AM output terminal value for the function assigned to the AM terminal.
FM Output — Displays the FM output terminal value for the function assigned to the FM terminal.
Motor OL (Overload) Real — Displays the
Motor OL (Overload) Trip — Displays the Motor Overload Trip value as a percentage of the rated capacity of the motor.
Motor Load — Displays the
ASD OL (Overload) Real — Displays the
ASD OL (Overload) Trip — Displays the ASD Overload Trip value as a percentage of the rated capacity of the ASD.
ASD Load — Displays the ASD Load as a percentage of the rated capacity of the H9 ASD.
Run Time — Displays the Cumulative Run Time in hours.
Compensation Frequency — Displays the Output Frequency after the application of the slip compensation correction value (Post Compensation Frequency).
DBR OL (Overload) Real — Displays the
DBR OL (Overload) Trip — Displays the DBR Overload Trip value as a percentage of the Dynamic Braking Resistor capacity.
DBR Load — Displays the DBR Load as a percentage of the Dynamic Braking Resistor capacity.
Feedback (inst) — Provides a status of the Real Time Feedback in Hz.
Feedback (1 second) — Provides a status of the
H9 ASD Installation and Operation Manual | 43 |