Toshiba H9 F119 F121, Input Terminal 9 LI1 Function, Input Terminal 10 LI2 Function

F119 F121

Input Terminal 9 (LI1) Function

Program ⇒ Terminal ⇒ Input Terminals

This parameter is used to set the functionality of the LI1 discrete input terminal.

In addition, this input terminal must be specified as Normally Open or Normally Closed.

This setting assigns the function of the programmable LI1 terminal to any one of the user-selectable functions listed in Table 5 on pg. 236.

Note: The Expansion IO Card Option 1 option board (P/N ETB003Z) is required to use this terminal.

Direct Access Number — F119

Parameter Type — Selection List

Factory Default — Unassigned

Changeable During Run — No

See the Expansion IO Card Option 1 instruction manual (P/N 58685) for more information on the function of this terminal.

Input Terminal 10 (LI2) Function

Program ⇒ Terminal ⇒ Input Terminals

This parameter is used to set the functionality of the LI2 discrete input terminal.

In addition, this input terminal must be specified as Normally Open or Normally Closed.

This setting assigns the function of the programmable LI2 terminal to any one of the user-selectable functions listed in Table 5 on pg. 236.

Direct Access Number — F120

Parameter Type — Selection List

Factory Default — Unassigned

Changeable During Run — No

Note:	The Expansion IO Card Option 1 option board (P/N ETB003Z)
	is required to use this terminal.
See the Expansion IO Card Option 1 instruction manual (P/N 58685) for
more information on the function of this terminal.
Input Terminal 11 (LI3) Function		Direct Access Number — F121
Program ⇒ Terminal ⇒ Input Terminals		Parameter Type — Selection List
This parameter is used to set the functionality of the LI3 discrete input terminal.		Factory Default — Unassigned
		Changeable During Run — No
In addition, this input terminal must be specified as Normally Open or
Normally Closed.
This setting assigns the function of the programmable LI3 terminal to any one
of the user-selectable functions listed in Table 5 on pg. 236.
Note:	The Expansion IO Card Option 1 option board (P/N ETB003Z)
	is required to use this terminal.

See the Expansion IO Card Option 1 instruction manual (P/N 58685) for

more information on the function of this terminal.

90 H9 ASD Installation and Operation Manual