Toshiba H9 operation manual F135 F137, Output Terminal 6 R1 Function, Direct Access Number F135

F135 F137

Output Terminal 6 (R1) Function

Program ⇒ Terminal ⇒ Output Terminals

This parameter is used to set the functionality of the R1 discrete output terminal.

In addition, this input terminal must be specified as Normally Open or Normally Closed.

This setting assigns the function of the programmable R1 terminal to any one of the user-selectable functions listed in Table 8 on pg. 241.

Direct Access Number — F135

Parameter Type — Selection List

Factory Default — Always OFF

Changeable During Run — No

Note:	The Expansion IO Card Option 1 option board (P/N ETB003Z)
	is required to use this terminal.
See the Expansion IO Card Option 1 instruction manual (P/N 58685) for
more information on the function of this terminal.
Output Terminal 7 (OUT5) Function		Direct Access Number —	F136
Program ⇒ Terminal ⇒ Output Terminals		Parameter Type — Selection List
This parameter is used to set the functionality of the OUT5 discrete output		Factory Default — Always Off
		Changeable During Run — No
terminal.
In addition, this output terminal must be specified as Normally Open or
Normally Closed.
This setting assigns the function of the programmable OUT5 terminal to any
one of the user-selectable functions listed in Table 8 on pg. 241.
Note:	The Expansion IO Card Option 2 option board (P/N ETB004Z)
	is required to use this terminal.
See the Expansion IO Card Option 2 instruction manual (P/N 58686) for
more information on the function of this terminal.
Output Terminal 8 (OUT6) Function		Direct Access Number —	F137
Program ⇒ Terminal ⇒ Output Terminals		Parameter Type — Selection List
This parameter is used to set the functionality of the OUT6 discrete output		Factory Default — Always Off
		Changeable During Run — No
terminal.
In addition, this output terminal must be specified as Normally Open or
Normally Closed.
This setting assigns the function of the programmable OUT6 terminal to any
one of the user-selectable functions listed in Table 8 on pg. 241.
Note:	The Expansion IO Card Option 2 option board (P/N ETB004Z)
	is required to use this terminal.

See the Expansion IO Card Option 2 instruction manual (P/N 58686) for more information on the function of this terminal.

94 H9 ASD Installation and Operation Manual