F936 |
| F940 | |
|
|
| |
Input Function Command 1 | Direct Access Number — | F936 | |
Program ⇒ My Function ⇒ My Function Unit 4 | Parameter Type — Selection List | ||
This parameter is used to assign a | Factory Default — 0 (NOP) |
| |
|
| ||
selected Input Function Target variables, enable a counter/timer function, or |
|
| |
perform a hold/reset function. |
|
| |
Table 11 on pg. 245 lists the available selections. Their use and selection |
|
| |
requirements are described in an example at F977. |
|
| |
|
|
| |
Input Function Target 2 | Direct Access Number — | F937 | |
Program ⇒ My Function ⇒ My Function Unit 4 | Parameter Type — Selection List | ||
This parameter plays a role in the setup of the My Function feature by | Factory Default — 0 (Disabled) | ||
Changeable During Run — Yes | |||
selecting the functionality of the programmable Input Function Target 2 | |||
|
| ||
terminal. |
|
| |
This setting assigns the function of the programmable Input Function Target 2 |
|
| |
terminal to any one of the |
|
| |
Table 8 on pg. 241, or Table 10 on pg. 243. |
|
| |
See F977 for more information on this parameter. |
|
| |
|
|
| |
Input Function Command 2 | Direct Access Number — | F938 | |
Program ⇒ My Function ⇒ My Function Unit 4 | Parameter Type — Selection List | ||
Factory Default — 0 (NOP)
This parameter is used to assign a
Table 11 on pg. 245 lists the available selections. Their use and selection requirements are described in an example at F977.
Input Function Target 3
Program ⇒ My Function ⇒ My Function Unit 4
This parameter plays a role in the setup of the My Function feature by selecting the functionality of the programmable Input Function Target 3 terminal.
This setting assigns the function of the programmable Input Function Target 3 terminal to any one of the
See F977 for more information on this parameter.
Direct Access Number — F939
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
Output Function Assigned
Program ⇒ My Function ⇒ My Function Unit 4
This parameter plays a role in the setup of the My Function feature by selecting the functionality of the Output Function Assigned terminal.
This setting assigns the function of the programmable Output Function Assigned data location to one of the functions listed in the Input Setting field of Table 8 on pg. 241.
Settings:
0 – 3099
Direct Access Number — F940
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
See the My Function Instruction Manual (P/N 58692) and F977 for more information on this parameter.
H9 ASD Installation and Operation Manual | 223 |
