Smeg STX1-7, STX1-5 manual Before Starting the Dishwasher After Prolonged Disuse

Page 37

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

•Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

•Plug the power cord back into the socket.

•Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

•the dishwasher is connected to the electrical power supply;

•there is no power failure;

•the water tap is open;

•the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

•the drain hose is not kinked;

•the drain siphon is not obstructed;

•the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

•the correct amount of detergent has been added;

•there is regenerating salt inside the special container;

•the dishes are being loaded correctly;

•the selected program is suitable for the dish types and their degree of soiling;

•all the filters are clean and positioned correctly;

•the spray arm nozzles are not obstructed;

•there is no object obstructing the rotation of the spray arms.

Image 37

Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controlsProgram Delay Button on some models only Programme Load Crockery Setting the Washing Program and Switching onProgram Progress Washing programs Cancelling the Current ProgramTable for Certification Bodies Changing the ProgramExtra Programs Selecting Half Load Wash on some models onlyTo Save on ENERGY! … and Protect the Environment Water Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleFault Description TroubleshootingWater loaded accurately. Interrupt the program For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketVersion B Adjusting the Upper BasketUser instructions Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598