Smeg STX1-7 Washing programs, Table for Certification Bodies, Cancelling the Current Program

Page 7

User instructions

TABLE FOR CERTIFICATION BODIES

Reference standard		EN 50242

Reference program		BIO

Load		Depending on the models 12 or 14 place-settings

Type of detergent		B

Amount of detergent		12 place-settings: 30 g - 14 place-settings: 35 g

Rinse aid setting		5/6

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

CANCELLING THE CURRENT PROGRAM

•To cancel the currently selected program, open the door and hold down the PROGRAM SELECTION (3) button for a few seconds until the indicator lights for programs 4 and 5 illuminate simultaneously.

•Close the door.

•After approximately 1 minute the dishwasher will advance to the end of cycle.

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a new program. When the door is closed the dishwasher will automatically select the new program.

Image 7

Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controlsProgram Delay Button on some models only Programme Load Crockery Setting the Washing Program and Switching onProgram Progress Changing the Program Cancelling the Current ProgramWashing programs Table for Certification BodiesExtra Programs Selecting Half Load Wash on some models onlyTo Save on ENERGY! … and Protect the Environment Water Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleFault Description TroubleshootingWater loaded accurately. Interrupt the program For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsWater supply connection Connecting to the Water SupplyDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketVersion B Adjusting the Upper BasketUser instructions Cleaning the Water Intake Filter Cleaning and maintenanceCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598