Smeg LSA14X7 Troubleshooting, User instructions, E1 E2 E3 E4 E5 E6, Fault, Description

Page 37
E1

E1

E2

E3

E4

E5

E6

36

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT

DESCRIPTION

 

 

 

Acquastop failure

 

The anti-flooding system has been activated (for the

 

relevant models only). The system is tripped in case

 

of water leaks. Contact the after-sales service.

 

 

 

Safety level

 

The system which limits the water level inside the

 

dishwasher has been tripped. Interrupt the program

 

and switch off the dishwasher. Switch the dishwasher

 

back on, program it again and start the washing

 

cycle. If the problem persists, contact the after-sales

 

service.

 

 

 

Water heating malfunction

 

The water is not heated or the heating parameters

 

are not correct. Repeat the washing program; if the

 

problem persists, contact the after-sales service.

 

 

 

Water temperature monitoring malfunction

 

Interrupt the program and switch off the dishwasher.

 

Switch the dishwasher back on, program it again and

 

start the washing cycle. If the problem persists,

 

contact the after-sales service.

 

 

 

Water intake malfunction

 

The appliance does not take in water or does not do

 

so correctly. Check that the water connections are

 

correct, the water intake tap is turned on and the filter

 

is not fouled. If the problem persists, contact the

 

after-sales service.

 

 

 

Water pump-out malfunction

 

The appliance does not pump out the water or does

 

not do so correctly. Check that the drain hose is not

 

kinked or crushed and that the siphon and filter are

 

not fouled. If the problem persists, contact the after-

 

sales service.

Image 37
Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructionsUSES OTHER THAN THOSE DESCRIBED ABOVE NEVER BE REMOVEDTHIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS2. Installation and hook-up Installation instructions2.1 Water supply connection DRAIN CONNECTION CONNECTING TO THE WATER SUPPLYNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD FOR GREAT BRITAIN ONLY Fuse replacement3. Description of the controls User instructionsSELECTED PROGRAM INDICATOR LIGHTS 3.1 Upper panel“3/1” OPTION BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION LIGHT HALF LOAD BUTTONReference program as per EN 50242 standard See energy label 0,85 0,03100’ 1,20Before starting a washing program make sure that 3.2 Washing programsThe correct amount of detergent has been added to the dispenser EXTRA PROGRAMSavailable in all programs except the soak program SELECTING HALF LOAD WASHDELAYED START available in all programs except the soak program CHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES END OF CYCLE4.1 Using the water softening system 4. Operating instructionsADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGDuring the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENTUser instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safeLOWER BASKET 4.4 Using the basketsLoading examples ½ LOAD LOADING THE LOWER BASKETCUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKETDepending on the models, the basket may be equipped with some or all of the following accessories Version B ADJUSTING THE UPPER BASKETUser instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendationsGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tapIf the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap againIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank FAULT 6. TroubleshootingSafety level E1 E2 E3 E4 E5 E6Turbine flow-regulator malfunction E7 E8 E9Alternate washing system malfunction Water intake system malfunctionElectrical characteristics TECHNICAL DATAWidth Height depending on models Capacity Water supply pressure