Smeg LF-453IT Washing programs, Table for Certification Bodies, Cancelling the Current Program

Page 5

User instructions

TABLE FOR CERTIFICATION BODIES

Reference standard		EN 50242

Reference program		ECO

Load		10 place-settings

Type of detergent		B

Amount of detergent		25 g

Rinse aid setting		Depending on the model 3/4 or 4/6

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

CANCELLING THE CURRENT PROGRAM

•To cancel the currently selected program, open the door and hold down the PROGRAM SELECTION (3) button for a few seconds until the indicator lights for programs 4 and 5 illuminate simultaneously (the word "end" is displayed on the window).

•Close the door.

•After approximately 1 minute the dishwasher will advance to the end of cycle.

Image 5

Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Setting the Washing Program and Switching onDescription of the controls 105 Table for Certification Bodies Cancelling the Current ProgramWashing programs END of Cycle Changing the ProgramRemoving the Dishes Adjusting the Water Softening SystemWater Hardness Table Fault Description TroubleshootingUser instructions For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsDrain Connection Connecting to the Water SupplyWater supply connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations User instructions Lower Basket Using the basketsEN 50242 Standard Loads for Certification Bodies Cutlery Basket Loading the Lower BasketLoading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Filter Unit Cleaning the Spray ARM, Travelling VersionGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Technical Data 19 570 0050