Smeg LF-453IT, LFU-453IT instruction manual User instructions

Page 9

User instructions

If an alarm occurs the appliance interrupts the program in progress and signals a fault.

•Alarms E1, E3, E4 interrupt the current program immediately.

•The E5, E6 alarms interrupts the running program once the cause is resolved, it will bring bach the execution of the program.

To “reset” an alarm is necessary:

•Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again.

If the malfunction persists, contact your authorised Service Centre.

Image 9

Contents Guide for Using the Dishwasher and the Washing Programs Contents Setting the Washing Program and Switching on Description of the controlsUpper panel 105 Cancelling the Current Program Washing programsTable for Certification Bodies END of Cycle Changing the ProgramAdjusting the Water Softening System Water Hardness TableRemoving the Dishes Fault Description TroubleshootingUser instructions For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsConnecting to the Water Supply Water supply connectionDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations User instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Cutlery Basket Loading the Lower BasketLoading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Cleaning the Filter Unit Cleaning the Spray ARM, Travelling VersionGeneral Warnings and Recommendations for Correct Maintenance If the dishes are not being cleaned properly, check that Technical Data 19 570 0050