User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an device for the user to adjust the water softening system according to the hardness of the water supply. The setting switch is inside the water softening system underneath the cap, and offers a choice of 5 settings.
WATER HARDNESS TABLE
| WATER HARDNESS |
|
| SETTING | ||
|
|
|
|
|
| |
German Degrees (°dH) |
| French Degrees (°dF) |
| |||
|
|
| ||||
|
|
|
|
|
|
|
0 | - 4 | 0 | - 7 |
| Setting N. 1 NO SALT | |
|
|
|
|
| ||
5 - 15 | 8 - 25 |
| Setting N. 1 | |||
|
|
|
|
|
|
|
16 | - 23 | 26 | - 40 |
| Setting N. 2 | |
|
|
|
|
|
|
|
24 | - 31 | 41 | - 60 |
| Setting N. 3 | |
|
|
|
|
|
|
|
32 | - 47 | 61 | - 80 |
| Setting N. 4 | |
|
|
|
|
|
| |
48 | - 58 | 81 - 100 |
| Setting N. 5 | ||
Contact your local water board for information on the hardness of your water supply.
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.