Beko TL 546 APS, TL 546 APW Using your refrigerator, Temperature Control And Adjustment Of Fridge

Models: TL 546 APW TL 546 APS

1 21
Download 21 pages 49.67 Kb
Page 16
Image 16
5Using your refrigerator

5Using your refrigerator

TEMPERATURE CONTROL AND ADJUSTMENT OF FRIDGE

Operating temperatures are controlled by the thermostat (seediagram). Settings may be made from 1 to 5, the coldest position. When the appliance is switched on for the first time, thethermostat should be adjusted so that after 24 hours, theaverage fridge temperature is no higher than +5°C (+41°F ).

We recommend you set the thermostat halfway between the 1 and 5 setting and monitor to obtain the desired temperature i. e. towards 5 you will obtain a colder fridge temperature and vice versa. Some sections of the fridge may be cooler or warmer ( such as the salad crisper and the top part of the cabinet ) which is quite normal.

Over ambient temperatures of 25°C (77°F) especially in summer turn the thermostat knob towards 5. Under ambient temperatures of 25°C (77°F) turn the thermostat knob to a half way position.Frequent door opening cause higher internal temperatures, so close the door as soon as possible after use.

In case of a temporary ice build up in the fridge compartment reduce the thermostat setting to 1, monitoring at the same time that the fridge temperature is maximum +5 degrees C (41 degrees F). Once the ice build up disappears and the appliance starts auto defrosting again as normal, then you may increase the thermostat setting, if required.

5

4

3

2

1

0

16

EN

Page 16
Image 16
Beko TL 546 APS, TL 546 APW manual Using your refrigerator, Temperature Control And Adjustment Of Fridge