REVERSING THE DOOR
We recommend that you reverse the door before switching on for the first time.
Tools required: Small and medium size flat and
-Door top trim hinge covers – there are 2 different parts, one for each side of top trim.
We suggest you keep all the parts supplied in the plastic bag and also parts, which have been removed when reversing the door, in a safe place for possible future,
IMPORTANT: We suggest you ask somebody to help you when moving the appliance around and to hold the door when removing /
Please refer to diagrams supplied. To follow numbers in brackets below, refer to the main diagram.
1.Switch off the appliance at the socket outlet and pull out the mains plug.
2.Remove all loose items and fittings and food inside the appliance.
3.Gently prise off plastic hinge covers on both sides of front top panel using a small
4- Unscrew the bolts of the top hinge and remove top hinge. (3)
5- Remove door carefully off the bottom hinge and stand door upright in a safe place.(4)
6.Gently prise off plastic hinge cover on door top trim. Fit the other door top trim plastic off hinge cover
supplied in the plastic bag.(5)
7.Gently tilt the appliance back against a strong wall on its rear side sufficiently to allow the lower hinge to
be removed. | Take care to protect | |
the appliance, your wall and floor |
| |
coverings. You can utilise the original | ||
packaging to do this. | Once | |
you tilt the appliance back, check to make sure the appliance is completely stable and safe before you carry
on. (6)
8.Unscrew and remove the front feet and 1 bolt. (7)
12
EN
